Aabedi Bafraajerd, Abdollah
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019, Pages 1-11]
Abasi, Marzeyeh
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Abbasgholinejhad Asbaghi, Rana
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021, Pages 356-367]
Abde, Mohammad Reza
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021, Pages 205-217]
Abdolah bik marandi, Morteza
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009, Pages 295-306]
Abdolahi, Mehdi
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Abdolali sarbandi, Mysam
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Abdoli, Farshid
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021, Pages 205-217]
Abdolkhani, ali
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014, Pages 484-492]
Abdolkhani, Ali
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Abdolkhani, Ali
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2014, Pages 732-741]
Abdolkhani, Ali
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
Abdolkhani, Ali
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015, Pages 653-661]
Abdolkhani, Ali
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017, Pages 518-529]
Abdolkhani, Ali
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012, Pages 556-568]
Abdolkhani, Ali
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008, Pages 40-49]
Abdolkhani, Ali
Chemical structure elucidation of milled wood lignin and cellulytic lignin from Poplar [Volume 23, Issue 2, 2008, Pages 102-122]
Abdolkhani, Ali
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2008, Pages 73-80]
Abdolkhani, Ali
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Abdolzadeh, Hamideh
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Abdolzadeh, Hamideh
Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading [Volume 31, SPRING 1, 2016, Pages 118-129]
Abdolzadeh, Hamideh
Effect of furfurylation on shear strength of bond line and screw withdrawal resistance of beech and fir [Volume 31, Fall 3, 2016, Pages 435-445]
Abdolzadeh, Hamideh
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010, Pages 62-69]
Abdolzadeh, Hamideh
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010, Pages 70-79]
Abdolzadeh, Hamideh
The Effects of Acetylated Poplar Particles on Applicational Properties of manufactured Particleboards with Isocyanate Resin [Volume 24, Issue 1, 2009, Pages 80-90]
Abdolzadeh, Hamideh
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020, Pages 294-305]
Abdolzadeh, Hamideh
Investigation affect of fiber reinforced polymer (FRP) on stress carrying capacity of miter corner joint under diagonal tension loading [Volume 35, Issue 4, 2021, Pages 307-320]
Abdulkhani, Ali
Improvement of adhesion strength of polyurethane and alkyd coatings by nano-silane using sol-gel method [Volume 32, Issue 3, 2017, Pages 322-333]
Abdulkhani, Ali
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Abedi, Mohsen
Investigation affect of fiber reinforced polymer (FRP) on stress carrying capacity of miter corner joint under diagonal tension loading [Volume 35, Issue 4, 2021, Pages 307-320]
Abidnejad, Roozbeh
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017, Pages 47-56]
Adab, Ali
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020, Pages 294-305]
Adalat, Hamidreza
Investigation of physical and mechanical properties of particleboard
made from Apricot pruning and industrial wood particles [Volume 24, Issue 2, 2009, Pages 244-253]
Adalat, Hamid reza
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008, Pages 136-148]
Adeli, Kamran
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Aenayati, Aliakbar
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014, Pages 493-501]
Aenayati, Aliakbar
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Afra, Elyas
Investigation on the effect of endoglucanase enzyme treatment time
and refining to improve OCC pulp properties [Volume 28, Issue 3, 2013, Pages 417-434]
Afra, Elyas
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014, Pages 254-265]
Afra, Elyas
Studying the Effect of Pulp Refining and Paper Pressing in Using Nano Fibrillated Cellulose to Improve the CMP Pulp Properties [Volume 31, Summer 2, 2016, Pages 224-236]
Afra, Elyas
Effect of coating packing paper with polylactic acid-chitosan and polylactic acid-nano-chitosan complexes [Volume 34, Issue 4, 2020, Pages 507-519]
Afra, Elyas
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020, Pages 22-32]
Afraz, Seddigheh
Extraction and Identification of Chemical Composition within Acetone Extract of Taxus baccata L. Bark [Volume 33, Issue 1, 2018, Pages 88-99]
Afsoni, Fatemeh
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017, Pages 145-156]
Afsooni, Fatemeh
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018, Pages 270-279]
Aghakhani, Mohammad
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013, Pages 301-312]
Aghanaghifar, Leila
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019, Pages 12-26]
Agharafiei, Ebrahim
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Ahmadi, Hamed
The effect of new product layout on customer satisfaction in wooden household furniture industries using structural equations model in Tehran province [Volume 31, Summer 2, 2016, Pages 294-308]
Ahmadi, Hossein
Investigation on mechanical properties of HDPE recycled composite filled by furfural residue produced from bagasse [Volume 30, Fall 3, 2015, Pages 376-387]
Ahmadi, Hossein
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017, Pages 131-144]
Ahmadi, Mohammad
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015, Pages 46-59]
Ahmadi, Mohammad
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015, Pages 653-661]
Ahmadi, Mohammad
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016, Pages 78-91]
Ahmadi, Mohammad
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017, Pages 94-105]
Ahmadi, Mohammad
The effect of recycling process on the chemical properties and wettability of obtained fibers from MDF wastes [Volume 32, Issue 4, 2017, Pages 553-564]
Ahmadi, Mohammad
Investigation on Neutral Sulfite Semi-Chemical Pulping of Reapseed (Canola) Residues [Volume 25, Issue 1, 2010, Pages 113-127]
Ahmadi, Mohssen
Investigating the bending strength of wooden pin in
H-shaped joints in MDF [Volume 27, Issue 3, 2012, Pages 423-433]
Ahmadi, Sayed mirsl
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2006, Pages 207-236]
Ahmadi ladjimi, Ali
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Ahmadi ladjimi, Ali
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019, Pages 50-61]
Ahmad Zadeh, Masoud
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Aibaghi esfahani, Hamid
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014, Pages 230-241]
Akbaepoor, Eiman
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011, Pages 117-127]
Akbari, Hamed
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013, Pages 224-237]
Akbari, Mina
The effect of water softening calcium carbonate on the fluting paper properties from OCC and NSSC [Volume 32, Issue 1, 2017, Pages 118-130]
Akbari, Moghadaseh
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Akbari, Moghadaseh
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Akbari, Sajad
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015, Pages 230-242]
Akbari nia, Moslem
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012, Pages 267-274]
Akbarpoor, Eiman
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011, Pages 523-534]
Akbarpoor, Eiman
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Akbarpoor, Eyman
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010, Pages 32-47]
Akbarpoor, Iman
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011, Pages 243-255]
Akbarpoor, Iman
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011, Pages 411-428]
Akbarpoor, Iman
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2018, Pages 223-233]
Akbarpour, Iman
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Akbarpour, Iman
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011, Pages 193-217]
Akhtari, Maliheh
Investigation effect of Weathering on Acetylated Beech Wood by FTIR
Spectroscopy and Electron Microscopic [Volume 25, Issue 1, 2010, Pages 48-61]
Akhtari, Maliheh
The effect of treatment duration with Trichoderma harzianum fungus on the biopreservation efficacy of beech wood against white rot [Volume 38, Issue 3, 2023, Pages 181-204]
Akrami, Ali
Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard [Volume 23, Issue 1, 2008, Pages 50-62]
Alampoor, Seyed Jafar
INVESTIGATION OF THE PRODUCTION CONDITION ON THE QUALITY OF PARTICLE BOARD MADE OF BAGASSE [Volume 20, No., 2, 2006, Pages 237-254]
Alavi seresht, Seid asghar
Effect of nano-wollastonite, poly vinyl chloride and heavy polyethylene polymers and board structure on fire resistance of particleboard made of pepper stalk and industrial wood [Volume 30, Fall 3, 2015, Pages 503-512]
Ale mansor, Hassan
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2006, Pages 207-236]
Ali, Abdolkhani
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Aliabadi, Meisam
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011, Pages 117-127]
Aliabadi, Meisam
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Aliabadi, Misam
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Aliniyay Lakani, Sahba
Studying the Effect of Pulp Refining and Paper Pressing in Using Nano Fibrillated Cellulose to Improve the CMP Pulp Properties [Volume 31, Summer 2, 2016, Pages 224-236]
Alipoor, Maryam
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016, Pages 375-387]
Alishahi, Mohammad
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Alizadeh, Hassan
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
Alizadeh, Maliheh
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017, Pages 486-497]
Amini, Mohammad reza
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004, Pages 25-48]
Aminian, Hedayat alah
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016, Pages 30-39]
Aminian, Hedayatollah
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Amini nasab, Saeid mojtaba
The Effect of Modification with Silan Compound on Physical Properties of Popolus [Volume 31, Fall 3, 2016, Pages 458-471]
Amininsab, Seyed Mojtaba
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015, Pages 490-503]
Amiri, Parviz
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Amiri, Shamohammad
INVESTIGATION ON SODA PULPING OF COTTON STALKS [Volume 20, No., 2, 2006, Pages 185-206]
Amiri, Shamohammad
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006, Pages 22-32]
Amiri, Shamohammad
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006, Pages 78-94]
Amiri, Sohil
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2015, Pages 526-237]
Andalibian, Mohammad amin
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Araaznia, zhreh
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016, Pages 58-66]
Arabi, Ahmadreza
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023, Pages 1-20]
Arabi, Mohammad
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Arabi, Mohammad
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Arabtabar, Habialah
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2001, Pages 61-123]
Arabtabar, Habibalah
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2001, Pages 39-72]
Arabtabar, Habibalah
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Arabtabar, Habib alah
Study on Termites Resistance of Oak Wood by Field test stakes [Volume 22, Issue 1, 2007, Pages 62-72]
Arabtabar, Habib alah
Acidity and buffering capacity of Iranian Woods [Volume 2, 2- No 166, 1987, Pages 116-151]
Arab tabar firoz jaei, Habib alah
FACTORS CAUSING ATTACK OF WOODEN VESSELS AND MARINE STRUCTURE IN COSTS OF IRAN [Volume 16, 16-No. 293, 2003, Pages 59-72]
Arab tabar firoz jaei, Habib alah
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2018, Pages 57-72]
Arab tabar firoz jaei, Habib alah
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003, Pages 63-76]
Arab tabar firoz jaei, Habib alah
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2004, Pages 205-218]
Arab tabar firoz jaei, Habib alah
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004, Pages 97-114]
Arab tabar firoz jaei, Habib alah
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004, Pages 115-131]
Arab tabar firoz jaei, Habib alah
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN MAHSHAHR (PERSIAN GULF), BANDAR TORKMAN AND NOSHAHR (CASPIAN SEA) COASTS [Volume 19, No., 2, 2004, Pages 193-210]
Arab tabar firoz jaei, Habib alah
INVESTIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R.T.BAKER) AGAINST TRAMETES VERSICOLOR L.EX [Volume 20, No., 1, 2005, Pages 133-142]
Arab tabar firoz jaei, Habib alah
INVETIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R. T.BAKER) BY FIELD TEST STAKES [Volume 21, No., 1, 2006, Pages 52-60]
Arbabi ghamsari, Farzad
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2017, Pages 621-633]
Archin, Saltanat
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019, Pages 12-26]
Arefkhani, Mehdi
Investigation effect of Weathering on Acetylated Beech Wood by FTIR
Spectroscopy and Electron Microscopic [Volume 25, Issue 1, 2010, Pages 48-61]
Aryaei monfared, Mohammadhadi
Investigating the effect of using oxygen delignification process on bagasse soda pulp properties [Volume 31, Summer 2, 2016, Pages 261-279]
Aryaei monfared, Mohammad hadi
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012, Pages 664-676]
Aryaie Monfared, Mohammad Hadi
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2019, Pages 544-552]
Asadi, Amin
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Asadi, Mojtaba
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021, Pages 283-292]
Asadi khoramabadi, Lila
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Asadi Malek Jahan, Faraz
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
Asadpoor, Ghasem
Application of nano silver in the production of antibacterial banknote paper [Volume 31, SPRING 1, 2016, Pages 166-179]
Asadpoor, Hamideh
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012, Pages 361-371]
Asadpoor atoeei, Ghasem
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2017, Pages 695-702]
Asadpour, Ghasem
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018, Pages 381-390]
Asadpour, Ghasem
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018, Pages 428-437]
Asadpour, Ghasem
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Asadpour, Ghasem
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Asadpour atoei, Gasem
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Asadpour atoei, Ghasem
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015, Pages 14-25]
Asadpour Atoi, Ghasem
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022, Pages 193-203]
Asadpur, Ghasem
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015, Pages 662-673]
Asadpur Atouei, Ghasem
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016, Pages 375-387]
Asareh, Mohammad hassan
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003, Pages 109-133]
Asareh, Mohammad hassan
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2004, Pages 155-184]
Asdolahzadeh, Mohammad taghi
Delignification of CMP pulp with Terametes versicolor [Volume 24, Issue 2, 2009, Pages 307-314]
Asdolah zadeh, Mohammad taghi
The effects of hot water pre-extraction and alkaline catalyzed on
soda-AQ pulping of kenaf whole stem [Volume 26, Issue 3, 2011, Pages 437-453]
Asgari, Alireza
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012, Pages 522-535]
Asgari, Alireza
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021, Pages 182-193]
Ashori, Alireza
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Ashori, Alireza
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Ashori, Alireza
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2019, Pages 531-543]
Ashori, Alireza
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022, Pages 59-72]
Ashrafi, Sayed Sajad
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022, Pages 229-238]
Ashrafi, Sayed Sajad
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023, Pages 237-249]
Ashrafi birghani, Sabah
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012, Pages 16-26]
Ashrafi Rad, Bagher
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Ashryeh, Ali
Investigation on the Effects of humidity and heat of combined papers on quality of CorrugatedBoard [Volume 25, Issue 2, 2018, Pages 309-320]
Ashtari, Hadi
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Atghia, Vahid
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021, Pages 64-77]
Azad, Fataneh
Effect of compatibilizer, MAPP, on physical and mechanical properties of
reed stem flour- polypropylene composites [Volume 24, Issue 2, 2009, Pages 232-243]
Azadfalah, Mohammad
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Azad falah, Mohammad
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Azadfallah, Mohammad
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015, Pages 330-340]
Azadfallah, Mohammad
The effect of pulp and cellulose nanofiber cyanoethylation on the physical properties of transformer insulating paper [Volume 31, SPRING 1, 2016, Pages 1-13]
Azadfallah, Mohammad
Assessment of accelerated aging for thermally upgraded transformer
insulation paper by dicyandiamide [Volume 31, Fall 3, 2016, Pages 446-457]
Azadfallah, Mohammad
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Azadfallah, Mohammad
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018, Pages 76-87]
Azadfallah, Mohammad
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018, Pages 280-289]
Azadfallah, Mohammad
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Azadfallah, Mohammad
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Azadfallah, Mohammad
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Azadfallah, Mohammad
Analysis of photodegraded lignin from hardwood
bleached chemimechanical pulp by 13C-NMR [Volume 24, Issue 2, 2009, Pages 254-263]
Azadfallah, Mohammad
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Azadfallah, Mohammad
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2020, Pages 475-487]
Azadfallah, Mohammad
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Azad fallah, Mohamad
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023, Pages 281-295]
Azad fallah, Mohammad
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Azad far, Mohammad ali
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011, Pages 232-242]
Azadi, Mehrnaz
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017, Pages 261-274]
Azadi boyaghchi, Mehrnaz
Modification of yellowing caused by oxidation of paper cellulose using Sodium borohydride and Sodium dithionite [Volume 38, Issue 4, 2023, Pages 296-315]
Azadi Boyaghchi, Mehrnaz
Evaluation of Performance of Enzruth Gum Extract in Removal of Stains Caused by Hand Contact from Historical Papers [Volume 35, Issue 2, 2020, Pages 152-164]
Azadifar, Masoud
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Azimi, Razieh
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021, Pages 171-181]
Azimi dalrstani, Ali
Effect of Beech bark Content on Physical and Mechanical Properties
of Bark Flour-Polypropylene Composites [Volume 26, Issue 4, 2012, Pages 811-823]
Azimvand, Jafar
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012, Pages 556-568]
Azizi, Jafar
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018, Pages 231-243]
Azizi, Majid
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
Azizi, Majid
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Azizi. Mossello, Ahmad
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2019, Pages 593-605]
B
Babakhani, Mitra
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021, Pages 171-181]
Badamchi, shahram
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015, Pages 183-193]
Badamchizadeh, Shahram
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021, Pages 340-355]
Baghbani, Razieh
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Bagheri, Ali
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Bagheri, Ali reza
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017, Pages 473-485]
Bagheri, Amir
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Bahmani, Mohsen
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2018, Pages 321-331]
Bahmani, Mohssen
A Study of the Effects of height and Thickness of Tenon Made Out of Beech and Hornbeam on bending Strength of Mortise and tenon joint [Volume 25, Issue 1, 2010, Pages 128-137]
Bahmani, Mohssen
Predicting of Withdrawal Strength With Dowel Joint in
Medium Density Fiber (MDF (By mathematic model [Volume 24, Issue 1, 2009, Pages 117-123]
Bai, Mohamad
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021, Pages 78-89]
Bakhshi, Mohammad
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018, Pages 244-255]
Balapoor, Shamsaldin
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012, Pages 361-371]
Balapoor, Shamsaldin
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012, Pages 69-80]
Balapour, Shamsaldin
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Barazandeh, Mohammad Mahdi
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017, Pages 25-32]
BARAZANDEH, MOHAMMAD MAHDI
Evaluating Rate Equations of Delignification Reaction of Bagasse in Soda Pulping [Volume 26, Issue 1, 2011, Pages 72-82]
Barimani, Abdollah
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015, Pages 662-673]
Barrani, Ebrahim
Assessing safety culture in the North of Iran wood and paper companies [Volume 29, SPRING 1, 2014, Pages 156-169]
Barzagar, Shayan
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
Barzan, Ali
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015, Pages 14-25]
Basiji, Farshid
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2018, Pages 187-200]
Bastani, Saeed
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018, Pages 76-87]
Bayamzadeh, Vilma
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Bayatkashkoli, Ali
Comparing the mechanical strength of wooden chairs constructed using two patterns and mortise and tenon and dowel joints [Volume 29, SPRING 1, 2014, Pages 67-78]
Bayat Kashkoli, Ali
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015, Pages 266-277]
Bayat Kashkoli, Ali
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015, Pages 674-689]
Bayramzadeh, Valima
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012, Pages 529-583]
Bayramzadeh, Vlima
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Baziyar, Behzad
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018, Pages 453-465]
Baziyar, Behzad
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Baziyar, Behzad
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021, Pages 182-193]
Baziyar, Behzad
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021, Pages 256-263]
Bazyar, Behzad
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013, Pages 224-237]
Bazyar, Behzad
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Bazyar, Behzad
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Bazyar, Behzad
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015, Pages 632-652]
Bazyar, Behzad
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016, Pages 92-104]
Bazyar, Behzad
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Bazyar, Behzad
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Bazyar, Behzad
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Bazyar, Behzad
Effects of Fungus Trametes versicolor and Coniophora puteana study,on
the Mass loss of Wood/Polypropylene Composites. [Volume 25, Issue 1, 2010, Pages 102-112]
Bazyar, Behzad
Evaluation of Natural durability of Horn beam (Carpinus betulus) wood against Coriolus Versicolor in case of Treated with CCA (Tanalith c) [Volume 25, Issue 2, 2018, Pages 260-274]
Bazyar, Behzad
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
Bazyar, Behzad
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021, Pages 64-77]
Bazyar, Behzad
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021, Pages 78-89]
Bazyar, Behzad
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021, Pages 283-292]
Bazyar, Behzad
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Behnam, Behzad
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Behravesh, Amir hossein
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2014, Pages 597-607]
Behroz, Rabi
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016, Pages 349-361]
Behroz, Rabi
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011, Pages 454-465]
Behroz, Rabi
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2012, Pages 622-633]
Behroz, Rabi
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2012, Pages 798-810]
Behroz, Rabi
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009, Pages 315-321]
Behroz, Rabie
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011, Pages 232-242]
Behroz, Rabie
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011, Pages 298-409]
Behzadi, Farahnaz
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Behzadi Shahrebabak, Amineh
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014, Pages 287-298]
Beiazyat, Alireza
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016, Pages 30-39]
Besharati, Shahin
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016, Pages 388-397]
Biparva, Porya
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2017, Pages 606-620]
Biparva, Prya
Effect of insitu synthesis of zinc oxide nanoparticles on the mechanical and biological properties of a wood-polymer composite [Volume 31, Issue 4, 2017, Pages 566-576]
Biprva, Porya
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2014, Pages 763-773]
Bordi Fotouhifar, Khalil
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Borhani, Mohammad reza
Investigation the position of wood and paper industry in the economic sector in Iran by input-output approach [Volume 31, Issue 4, 2017, Pages 634-647]
Boroshkian, Hadi
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018, Pages 381-390]
Borzacchiello, Assunta
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
Brancheriau, Loeic
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Brazandeh, Mohammad mehdi
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011, Pages 83-97]
Brazandeh, Mohammad mehdi
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2018, Pages 157-169]
Brazandeh, Mohammad Mehdi
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Brzali, Samira
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016, Pages 500-509]
Bvanaghi, Fatemeh
Effects of acetylation and press time on heat transfer in particleboard
mat from Hornbeam wood (Carpinus betulus) [Volume 27, Issue 3, 2012, Pages 510-521]
Byat kashkoli, Ali
Determination of proper college student chair dimension and comparison with the prevalent model [Volume 26, Issue 4, 2012, Pages 772-784]
C
Chaalaakeh, Raahil
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017, Pages 498-508]
Chabavizadeh, Javaher
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017, Pages 131-144]
Chahar mahal, Majid
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2006, Pages 255-270]
Chaharmahali, Abas
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015, Pages 618-631]
Chaharmahali, Majid
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009, Pages 194-205]
Chaharmahali, Majid
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2006, Pages 271-284]
Chaharmahali, Majid
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006, Pages 33-42]
Chaharmahali, Majid
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006, Pages 70-77]
Chahar mahali, Majid
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006, Pages 61-69]
Charmahali, Majid
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2006, Pages 285-301]
D
Dadashi, Esmaeil
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017, Pages 145-156]
Dadashi, Saeid
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017, Pages 145-156]
Daday Ghandi, Sadigheh
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Dadkhahi tehrani, Behnaz
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008, Pages 74-82]
Dadkhahi tehrani, Behnaz
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008, Pages 178-190]
Dadkhah tehrani, Behnaz
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006, Pages 70-77]
Dadmohamadi, Kobra
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022, Pages 73-85]
Daeepour, Zahra
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Dahmardeh, Habib
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019, Pages 50-61]
Dahmardeh ghaleh no, Mohammad
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2018, Pages 302-308]
Dahmardeh ghale no, Mohammad
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009, Pages 264-274]
Dahmardeh Ghaleno, Mohammad
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023, Pages 87-99]
Dalirzadeh, Amin
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014, Pages 452-463]
Dalvand, Mosayeb
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Dalvand, Mosayeb
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017, Pages 171-180]
Danekar, Afshin
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015, Pages 278-288]
Darabi, Pyvand
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010, Pages 70-79]
Dashti, Hadi
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Dashti, Hadi
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019, Pages 349-360]
Dashti, Parvin
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Dastoorian, Foroogh
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018, Pages 142-154]
Davodi, Niloufar
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Davodian, Hasan
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018, Pages 428-437]
Dehdast, Fatemeh
Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor) [Volume 31, SPRING 1, 2016, Pages 14-29]
Dehghan, Moein
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019, Pages 50-61]
Dehghan, Seaid Alireza
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016, Pages 472-485]
Dehghani, Mohammad reza
Study of initial alkali charge effects on properties of soda beech pulp by regression models [Volume 26, Issue 2, 2011, Pages 219-231]
Dehghani Firouzabadi, Mohammadreza
Replacing imported long fiber pulp with kenaf bast fiber soda pulp to improve quality of paper made from bagasse soda pulp [Volume 23, Issue 2, 2008, Pages 157-168]
Dehghani Firouzabadi, Mohammadreza
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020, Pages 165-177]
Dehghani Firouzabadi, Mohammad Reza
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019, Pages 100-111]
Dehghani Firouzabadi, Mohammad Reza
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023, Pages 330-340]
Dehghani firozabadi, Mohamadreza
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019, Pages 255-262]
Dehghani firozabadi, Mohammadreza
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2018, Pages 302-308]
Dehghani firozabadi, Mohammad reza
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Dehghani firoz abadi, Mohammadreza
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Dehghani firoz abadi, Mohammad reza
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Dehghani Firoz Abadi, Mohammad reza
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Dehghani firuzabadi, Mohammad reza
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2015, Pages 503-514]
Delnavaz, Vahid
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Dhghani Firozabadi, Mohammad reza
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2017, Pages 541-556]
Doosthoseini, Kazem
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2017, Pages 648-661]
Doosthoseini, Kazem
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010, Pages 70-79]
DoosthoseinI, Kazem
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Doosthosseini, Kazem
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Doosthosseini, Kazem
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004, Pages 137-158]
Doosthosseini, Kazem
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005, Pages 95-110]
Doosthosseini, Kazem
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005, Pages 111-132]
Doosthosseini, Kazem
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006, Pages 70-77]
Doost hosseini, Kazem
The Effects of Acetylated Poplar Particles on Applicational Properties of manufactured Particleboards with Isocyanate Resin [Volume 24, Issue 1, 2009, Pages 80-90]
Doost hosseini, Kazem
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008, Pages 1-11]
Doosthosseiny, Kazem
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Doreemam, Ardlan
The Investigation of the Utilization Impact of
Alnus subcordata Waste and Poplar Wood in Particle Board Production [Volume 30, SPRING 1, 2015, Pages 37-45]
Dos hosseini, Kazem
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Dossthoseini, Kazemi
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008, Pages 74-82]
Dosthosseini, Kazem
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012, Pages 649-654]
Dosthosseini, Kazem
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012, Pages 348-360]
Dosthosseini, Kazem
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012, Pages 81-88]
Dosthosseini, Kazem
Utilization of date palm and kenaf fibers for reinforcement of
practical properties of plywood [Volume 26, Issue 3, 2011, Pages 495-510]
Dosthosseini, Kazem
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Dosthosseini, Kazem
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008, Pages 91-101]
Dost hosseini, Kazem
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Dost hosseini, Kazem
Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing [Volume 26, Issue 2, 2011, Pages 271-280]
Dost hosseini, Kazem
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Dost hosseini, Kazem
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011, Pages 300-313]
Dost hosseini, Kazem
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Dost hosseini, Kazem
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010, Pages 62-69]
Dost Hosseini, Kazem
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Drakhshandeh, Delaram
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2008, Pages 99-108]
E
Ebadi, Seyed Eshagh
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022, Pages 229-238]
Ebadi, Seyed Eshagh
Identification and comparison of organic chemical components in leaves of the planted Elder Pine (Pinus eldarica) and Sycamore (Platanus orientalis) using GC-MS methods [Volume 37, Issue 3, 2022, Pages 261-270]
EBADI, S. ESHAGH
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021, Pages 368-381]
EBADI, S. ESHAGH
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024, Pages 55-71]
Ebrahimi, Ghanbar
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Ebrahimi, Ghanbar
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Ebrahimi, Ghanbar
Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading [Volume 31, SPRING 1, 2016, Pages 118-129]
Ebrahimi, Ghanbar
Creep rupture behavior of a bagasse fiber-polypropylene composite [Volume 31, Issue 4, 2017, Pages 671-683]
Ebrahimi, Ghanbar
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2017, Pages 648-661]
Ebrahimi, Ghanbar
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Ebrahimi, Ghanbar
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017, Pages 171-180]
Ebrahimi, Ghanbar
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Ebrahimi, Ghanbar
A Study of the Effects of height and Thickness of Tenon Made Out of Beech and Hornbeam on bending Strength of Mortise and tenon joint [Volume 25, Issue 1, 2010, Pages 128-137]
Ebrahimi, Ghanbar
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2018, Pages 211-222]
Ebrahimi, Ghanbar
Predicting of Withdrawal Strength With Dowel Joint in
Medium Density Fiber (MDF (By mathematic model [Volume 24, Issue 1, 2009, Pages 117-123]
Ebrahimi, Ghanbar
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007, Pages 41-50]
Ebrahimi, Ghanbar
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2001, Pages 39-72]
Ebrahimi, Ghanbar
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006, Pages 1-8]
Ebrahimi, Ghanbar
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006, Pages 61-69]
Ebrahimi, Ghanbar
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Ebrahimi, Ghanbar
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Ebrahimi, Marjan
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018, Pages 417-427]
Ebrahimi, Poneh
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2017, Pages 541-556]
Ebrahimi, Zahra
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Ebrahimpoor kasmani, Jafar
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012, Pages 326-337]
Ebrahimpoor kasmani, Jafar
Investigation on the Effects of humidity and heat of combined papers on quality of CorrugatedBoard [Volume 25, Issue 2, 2018, Pages 309-320]
Ebrahim poor tasmani, Jafar
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011, Pages 429-436]
Ebrahimpour Kasmani, Jafar
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013, Pages 1-10]
Ebrahimpour Kasmani, Jafar
The effect of using cellulosic Nanofiber and imported chemical pulp and paper on durable paper made of below comb fibers [Volume 33, Issue 3, 2018, Pages 337-346]
Ebrahimpour Kasmani, Jafar
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Ebrahimpour Kasmani, Jafar
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020, Pages 1-10]
Ebrahimpour Kasmani, Jafar
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021, Pages 157-169]
Ebrahimpour Kasmani, Jafar
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022, Pages 204-216]
Ebrahimpour Kasmani, Jafar
Investigating the effect of coated cardboard storage in freezer coated with two layers of nano-polyurethane and nano-clay on its physical and mechanical properties [Volume 38, Issue 3, 2023, Pages 205-214]
Ebrahimpour Kasmani, Jafar
Comparison of separate and combined effect of nanosilica and cationic additives on the optical properties of the white packaging liner [Volume 38, Issue 4, 2023, Pages 266-280]
Ebrahimzadeh, Mohammad Ali
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013, Pages 522-533]
Edalat, Hamidreza
Adhesive Modification and Improvement of Properties of Polyvinyl Acetate Using Nano silica [Volume 38, Issue 2, 2023, Pages 128-140]
Efhami, Davod
Study of initial alkali charge effects on properties of soda beech pulp by regression models [Volume 26, Issue 2, 2011, Pages 219-231]
Efhami, Davood
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009, Pages 134-147]
Efhamisisi, Davood
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Efhamisisi, Davood
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020, Pages 46-60]
Efhamisisi, Davood
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
Efhamisisi, Davood
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021, Pages 264-282]
Efhamisisi, Davood
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023, Pages 281-295]
Efhamisisi, Davood
The effect of treatment duration with Trichoderma harzianum fungus on the biopreservation efficacy of beech wood against white rot [Volume 38, Issue 3, 2023, Pages 181-204]
Einollahi, yashar
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
Einollahi, Yashar
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021, Pages 105-118]
Eisapor, Reza
Investigation and compare the tensile strength of hardwood dowel joints, made by glue and welding [Volume 32, Issue 3, 2017, Pages 382-391]
Eisapor, Reza
Investigating the effect of diameter and dowel surface in softwood joints, made by welding and glue [Volume 32, Issue 4, 2017, Pages 598-605]
Ekhtera, Mohammad hassan
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008, Pages 40-49]
Elyasi, Abdolah
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2014, Pages 597-607]
Elyasy, Abdolah
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Emadi, Mehdi
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017, Pages 205-214]
Emami nasab, Mohammad
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015, Pages 653-661]
Enayati, Aliakbar
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Enayati, Aliakbar
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010, Pages 80-90]
Enayati, Aliakbar
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2004, Pages 139-154]
Enayati, Ali akbar
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015, Pages 289-298]
Enayati, Ali akbar
Effects of waste polyester fibers on the mechanical and thermal properties of WPC products [Volume 30, WINTER 4, 2015, Pages 552-566]
Enayati, Ali akbar
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012, Pages 434-444]
Enayati, Ali akbar
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Enayati, Ali akbar
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Enayati, Ali akbar
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Enayati, Ali akbar
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Enayati, Ali akbar
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2012, Pages 719-731]
Enayati, Ali akbar
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Enayati, Ali akbar
Feasibility of utilizing polypropylene as a binder for plywood manufacture [Volume 24, Issue 1, 2009, Pages 91-98]
Enayati, Ali akbar
Investigation of physical and mechanical properties of particleboard
made from Apricot pruning and industrial wood particles [Volume 24, Issue 2, 2009, Pages 244-253]
Enayati, Ali akbar
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008, Pages 63-73]
Enayati, Ali akbar
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008, Pages 149-156]
Enayati, Ali akbar
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007, Pages 1-17]
Enayati, Ali akbar
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007, Pages 18-28]
Enayati, Ali akbar
Investigating on the effect of wood pH on particleboard properties [Volume 4, 4- No. 181, 1998, Pages 51-155]
Enayati, Ali kabar
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Eraghi, Mohammad Kazem
Assessing safety culture in the North of Iran wood and paper companies [Volume 29, SPRING 1, 2014, Pages 156-169]
Eshaghi, Saeid
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Eshaghi, Saeid
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Eshagi, Saeid
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Eshghi, Ayob
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Eshraghi, Amir
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Eskandari, Ahmad Reza
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019, Pages 167-179]
Eskandari, Jafar
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Eskini, Nima
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012, Pages 529-583]
Eskini, Nima
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Eslah, Farnaz
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2012, Pages 719-731]
Esmaeeli, Neda
Determination the optimal conditions of chemical modification on Poplar wood with Glutaraldehyde and physical properties of products [Volume 31, Summer 2, 2016, Pages 211-223]
Esmaeili, Neda
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2017, Pages 606-620]
Esmaeiliymoghadam, Saeid
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016, Pages 486-499]
Esmaeilzadeh Saeih, Salume
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019, Pages 337-348]
Esmailiey, Omid
Effect of Alkali Oxidation of fiber on characteristic of virgin and recycled pulp [Volume 38, Issue 4, 2023, Pages 316-329]
Ezadyar, Sohila
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008, Pages 40-49]
F
Faezipoor, Mehdi
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2008, Pages 109-120]
Faezipoor, Mohammad mehdi
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Faezipoor, Mohammad mehdi
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Faezipoor, Mohammad mehdi
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2012, Pages 699-707]
Faezipoor, Mohammad mehdi
Investigation on Neutral Sulfite Semi-Chemical Pulping of Reapseed (Canola) Residues [Volume 25, Issue 1, 2010, Pages 113-127]
Faezipoor, Mohammad mehdi
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2018, Pages 321-331]
Faezipoor, Mohammad mehdi
Effect of compatibilizer, MAPP, on physical and mechanical properties of
reed stem flour- polypropylene composites [Volume 24, Issue 2, 2009, Pages 232-243]
Faezipoor, Mohammad mehdi
Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard [Volume 23, Issue 1, 2008, Pages 50-62]
Faezipoor, Mohammad mehdi
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007, Pages 1-17]
Faezi poor, Mohammadmehdi
Investigating the characteristics of strandboard produced from beech veneer residues [Volume 4, 4- No. 181, 1998, Pages 156-212]
Faezi poor, Mohammadmehdi
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004, Pages 137-158]
Faezi poor, Mohammad mehdi
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008, Pages 149-156]
Faezi poor, Mohammad mehdi
Investigation on the Effect of strandboard production variables on strand characteristics [Volume 4, 4- No. 181, 1998, Pages 1-50]
Faezipour, Mohamad Mehdi
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Faezipour, Mohammad Mehdei
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Faezipour, Mohammad Mehdi
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2017, Pages 648-661]
Faezipour, Mohammad Mehdi
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
Faezi pour, Mohamad mehdi
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
Fakhryan, Abas
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Fakhryan, Abas
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2014, Pages 685-690]
Fakhryan, Abas
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Fakhryan, Abas
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011, Pages 83-97]
Fakhryan, Abas
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2018, Pages 157-169]
Fakhryan, Abas
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2018, Pages 170-186]
Fakhryan, Abas
Investigation on pulping potential of Iranian rice straw in the paper industries [Volume 6, 6- No. 183, 1998, Pages 1-77]
Fakhryan, Abbas
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017, Pages 25-32]
Fakhryan roghani, Abbas
Evaluating Rate Equations of Delignification Reaction of Bagasse in Soda Pulping [Volume 26, Issue 1, 2011, Pages 72-82]
Fakhryan roghani, Abbas
Comparative Study On Fiber Dimension, Density And Chemical
Components Of Two Varieties Of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 36-44]
Fakhryan roghani, Abbas
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009, Pages 183-193]
Fakhryan roghani, Abbas
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007, Pages 41-50]
Fakhryan roghani, Abbas
Investigation on organosolv pulping of wheat straw [Volume 6, 6- No. 183, 1998, Pages 78-160]
Fakhryan roghani, Abbas
Comparative study on Pulping characteristics of Carpinus betulus and Parotia oersica woods [Volume 9, 9-No. 225, 2000, Pages 1-33]
Fakhryan roghani, Abbas
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000, Pages 91-147]
Fakhryan roghani, Abbas
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [Volume 12, 12-No. 251, 2001, Pages 1-38]
Fakhryan roghani, Abbas
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Fakhryan roghani, Abbas
PULP AND PAPER PROPERTIES OF EUCALYPTUS MICROTHECA GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-107]
Fakhryan roghani, Abbas
THE COMPARISON OF FIBER BIOMETRY AND CHEMICAL COMPONENTS OF PHRAGMITES AUSTRALIS FOR PAPERMAKING [Volume 14, 14-No. 272, 2002, Pages 73-109]
Fakhryan roghani, Abbas
WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN [Volume 15, 15-No. 278, 2002, Pages 1-17]
Fakhryan roghani, Abbas
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 15, 15-No. 278, 2002, Pages 33-60]
Fakhryan roghani, Abbas
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2003, Pages 1-28]
Fakhryan roghani, Abbas
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2004, Pages 219-238]
Fakhryan roghani, Abbas
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN [Volume 19, No., 2, 2004, Pages 175-192]
Fakhryan roghani, Abbas
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM WOOD (CARPINUS BETULUS L.) GROWN AT DIFFERENT ELEVATION OF GOLESTAN FORESTS, IRAN [Volume 19, No., 2, 2004, Pages 259-287]
Fakhryan roghani, Abbas
SAWING PATTERN FOR POPLAR WOOD (POPULUS NIGRA) [Volume 20, No., 1, 2005, Pages 23-46]
Fakhryan roghani, Abbas
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005, Pages 65-94]
Falah, Asghar
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Falahdoost, Shahrokh
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN [Volume 19, No., 2, 2004, Pages 175-192]
Falahdoost, Shahrokh
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM WOOD (CARPINUS BETULUS L.) GROWN AT DIFFERENT ELEVATION OF GOLESTAN FORESTS, IRAN [Volume 19, No., 2, 2004, Pages 259-287]
Familian, Hossein
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1987, Pages 1-115]
Familian, Hossein
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1987, Pages 152-188]
Familian, Hossein
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2001, Pages 61-123]
Familian, Hossein
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Familian, Hossein
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2003, Pages 73-93]
Familian, Hossein
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003, Pages 109-133]
Familian, Hossein
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2004, Pages 155-184]
Familian, Hossein
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2004, Pages 239-267]
Familian, Hossein
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004, Pages 69-98]
Familian, Hossein
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006, Pages 43-51]
Familian, Hossein
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Farajalah poor, Mohammad
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012, Pages 348-360]
Faraji, Farshid
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016, Pages 500-509]
Faraji, Farshid
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Faraji, Farshid
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018, Pages 391-401]
Faraji, Farshid
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021, Pages 1-13]
Faraji, Farshid
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Farajpoor Roodsari, Arash
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013, Pages 561-582]
Farajpoor Roodsari, Arash
Investigation on Physical and Mechanical Properties of Nanocomposites Made From Flour Of Pistachio Shell/ Corn Starch/ Nanoclay [Volume 29, SPRING 1, 2014, Pages 142-155]
Farajpoor Roodsari, Arash
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014, Pages 79-93]
Farajpour Roudsari, Arash
Comparative study of chemical components and morphological features
of trunk and cone fibers from loblolly pine grown in Gilan province [Volume 28, Issue 3, 2013, Pages 545-560]
Farashian, Ebrahim
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2006, Pages 207-236]
Farashiani, Ebrahim
AN INVESTIGATION ON DAMAGE OF AEOLESTHES SARTA SOLSKY ON INDUSTRIAL TIMBER IN IRAN [Volume 17, 17-No. 300, 2018, Pages 73-95]
Farhadi, Faezeh
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018, Pages 142-154]
Farhadi, Faezeh
Effect of test temperature on creep behavior of heat treated of Velvet Maple [Volume 34, Issue 3, 2019, Pages 424-434]
Farhadi, Zinat
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2015, Pages 503-514]
Farnod, Ramin
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Farokhpayam, saeid reza
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017, Pages 402-410]
Farokhpayam, Saeid reza
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014, Pages 452-463]
Farokhpayam, Saeid reza
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015, Pages 230-242]
Farokh payam, Saeid reza
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2015, Pages 626-635]
Farrokhpayam, Saeid Reza
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023, Pages 87-99]
Farsi, Mohammad
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Farsi, Mohammad
Investigating the effect of functionalized carbon nanotubes on physical and mechanical properties of wood-plastic nanocomposite [Volume 38, Issue 1, 2023, Pages 59-74]
Farsi, Ramin
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013, Pages 476-488]
Farsi, Ramin
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015, Pages 243-255]
Farzi, Mahid
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012, Pages 434-444]
Farzi, Majid
Investigation on Size Distribution and Fiber Dimensions of Cornstalks [Volume 24, Issue 1, 2009, Pages 1-14]
Fatehi, Ehsan
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Fathi, Leila
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2018, Pages 321-331]
Fathi, Lyla
Predicting of Withdrawal Strength With Dowel Joint in
Medium Density Fiber (MDF (By mathematic model [Volume 24, Issue 1, 2009, Pages 117-123]
Fathi, Shadabeh
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017, Pages 13-24]
Fatolahzadeh, Ali
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2018, Pages 27-56]
Fazeli, Anooshe
Effect of density and industrial wood particles to cement ratio on mechanical and physical properties of wood cement composites [Volume 35, Issue 4, 2021, Pages 362-375]
Fazeli, Faezeh
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Firouzbehi, Farhod
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
Foladi, Hossein
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015, Pages 618-631]
Frozan, Zibab
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2015, Pages 572-580]
Frozan, Zinab
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Frozan, Zinab
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012, Pages 568-753]
G
Ganjaei sari, Morteza
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015, Pages 690-704]
Ganjyan, Esmaeil
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Gerar, Janin
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012, Pages 568-753]
Ghahrani, Negin
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Ghahrani, Negin
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Ghahri, Saman
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019, Pages 387-396]
Ghahri, Saman
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Ghahri, Saman
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021, Pages 132-143]
Ghahri, Saman
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021, Pages 205-217]
Ghahri, Saman
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021, Pages 329-339]
Ghahri, Saman
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Ghahri, Saman
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022, Pages 251-260]
Ghahri, Saman
Evaluation of engineering characteristics of decayed thermo-wood by brown rot fungus [Volume 37, Issue 4, 2022, Pages 306-317]
Ghahrmani, Saleh
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015, Pages 606-617]
Ghamari, Reza
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2015, Pages 572-580]
Ghasemi, Amir Hosein
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Ghasemi, Behzad
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018, Pages 391-401]
Ghasemi, esmaeil
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Ghasemi, Esmaeil
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Ghasemi, Esmaeil
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Ghasemi, Esmaeil
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015, Pages 207-219]
Ghasemi, Esmaeil
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Ghasemi, Esmaeil
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019, Pages 337-348]
Ghasemi, Esmaeil
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021, Pages 105-118]
Ghasemi, Esmail
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Ghasemi, hadi
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019, Pages 397-408]
Ghasemi, Hanieh
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Ghasemi, Hanieh
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Ghasemi, Ismail
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021, Pages 283-292]
Ghasemi, Somayeh
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011, Pages 298-409]
Ghasemi, Somayeh
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010, Pages 138-146]
Ghasemian, Ali
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Ghasemian, Ali
Fiber dimensions and chemical properties of bamboo phyllostachys pubescens [Volume 29, Summer 2, 2014, Pages 335-345]
Ghasemian, Ali
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Ghasemian, Ali
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Ghasemian, Ali
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011, Pages 98-116]
Ghasemian, Ali
The effects of hot water pre-extraction and alkaline catalyzed on
soda-AQ pulping of kenaf whole stem [Volume 26, Issue 3, 2011, Pages 437-453]
Ghasemian, Ali
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009, Pages 264-274]
Ghasemian, Ali
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008, Pages 12-19]
Ghasemian, Ali
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022, Pages 193-203]
Ghasemian, Ali
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023, Pages 330-340]
Ghasemieh, Mehdi
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Ghasemiyan, Ali
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Ghasemiyan, Ali
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2017, Pages 541-556]
Ghaznavi, Mohammad reza
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013, Pages 89-96]
Ghazvini, Zohreh
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016, Pages 375-387]
Ghlamian, Hadi
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Ghofrani, mohammad
Studying the effect of acetylation Beech on interfacial bonding resistance of transparent paint (nitrocellulose lacquer, asid catalyzed lacquer and Half Ppolyester) [Volume 31, SPRING 1, 2016, Pages 105-117]
Ghofrani, Mohammad
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2014, Pages 720-731]
Ghofrani, Mohammad
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Ghofrani, Mohammad
Tensile and compressive load-bearing capacity of combined stresses investigated in connection with built-lingual Corner 45 ° Mobile [Volume 30, Summer 2, 2015, Pages 308-319]
Ghofrani, Mohammad
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015, Pages 690-704]
Ghofrani, Mohammad
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016, Pages 248-260]
Ghofrani, Mohammad
Heat treatment of wood in dry medium and investigation on its effect on surface wettability and adhesion strength of coating [Volume 31, Summer 2, 2016, Pages 362-373]
Ghofrani, Mohammad
Investigation of the domestic living furniture producer’s point of view on the way of manufacturing and selling of these products [Volume 31, Issue 4, 2017, Pages 581-594]
Ghofrani, Mohammad
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2017, Pages 621-633]
Ghofrani, Mohammad
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012, Pages 619-634]
Ghofrani, Mohammad
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019, Pages 205-216]
Ghofrani, Mohammad
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022, Pages 59-72]
Ghofrani, Mohammad
The Effect of alumina nanoparticles on adhesion strength of clear varnishes applied on walnut and spruce wood [Volume 37, Issue 4, 2022, Pages 271-281]
Gholami, Zahra
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2020, Pages 475-487]
Gholamiyan, Hadi
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019, Pages 326-336]
Gholamiyan, Hadi
Study of thermal fatigue on the cracking, adhesion and gloss properties of wood coatings [Volume 36, Issue 2, 2021, Pages 119-131]
Gholamiyan, Hadi
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Gholamiyan, Hadi
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022, Pages 293-305]
Gholampoor, Behnam
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Gholampoor, Behnam
The effect of some additives to improve water absorption and strengths of paper prepared from old corrugated container [Volume 38, Issue 4, 2023, Pages 251-265]
Gholinezhad-Pirbazari, AliReza
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023, Pages 281-295]
Gholipor, Taherh
Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite [Volume 30, WINTER 4, 2015, Pages 595-605]
Gholipour, taherh
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2014, Pages 628-641]
Gholipour, Taherh
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Ghomi marzdashti, Hamidreza
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Ghorbani, Maryam
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2014, Pages 763-773]
Ghorbani, Maryam
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015, Pages 466-474]
Ghorbani, Maryam
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015, Pages 490-503]
Ghorbani, Maryam
Determination the optimal conditions of chemical modification on Poplar wood with Glutaraldehyde and physical properties of products [Volume 31, Summer 2, 2016, Pages 211-223]
Ghorbani, Maryam
Effect of thermal modification on the practical properties of horn beam bark flour-polypropylene composites [Volume 31, Summer 2, 2016, Pages 280-293]
Ghorbani, Maryam
The Effect of Modification with Silan Compound on Physical Properties of Popolus [Volume 31, Fall 3, 2016, Pages 458-471]
Ghorbani, Maryam
Effect of insitu synthesis of zinc oxide nanoparticles on the mechanical and biological properties of a wood-polymer composite [Volume 31, Issue 4, 2017, Pages 566-576]
Ghorbani, Maryam
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2017, Pages 606-620]
Ghorbani, Maryam
Effect of thermal modification on physical and mechanical behavior of sunflower-polypropylene composites [Volume 32, Issue 3, 2017, Pages 392-401]
Ghorbani, Maryam
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers [Volume 33, Issue 2, 2018, Pages 196-204]
Ghorbani, Maryam
Effects of acetylation and press time on heat transfer in particleboard
mat from Hornbeam wood (Carpinus betulus) [Volume 27, Issue 3, 2012, Pages 510-521]
Ghorbanian Far, Mohammad
Studying physical and mechanical properties of two Iranian walnut wood from Noor and Shahrkord regions [Volume 38, Issue 3, 2023, Pages 215-224]
Ghorbani kobandeh, Maryam
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Ghorbanzadeh, Atamalek
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021, Pages 264-282]
Ghotbaldin, Farhad
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2018, Pages 201-210]
Ghotibi far, Alireza
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009, Pages 315-321]
Givar, lily
Investigation of fungal contamination in some manuscript of Malek Museum [Volume 36, Issue 2, 2021, Pages 170-178]
Gohari, Saleh
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Golbabaei, Fardad
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013, Pages 381-391]
Golbabaei, Fardad
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Golbabaei, Fardad
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Golbabaei, Fardad
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
Golbabaei, Fardad
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014, Pages 324-334]
Golbabaei, Fardad
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2015, Pages 633-643]
Golbabaei, Fardad
Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard [Volume 31, Issue 4, 2017, Pages 557-568]
Golbabaei, Fardad
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015, Pages 457-465]
Golbabaei, Fardad
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Golbabaei, Fardad
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018, Pages 402-416]
Golbabaei, Fardad
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Golbabaei, Fardad
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Golbabaei, Fardad
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Golbabaei, Fardad
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Golbabaei, Fardad
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011, Pages 83-97]
Golbabaei, Fardad
Investigation on Physical and Mechanical Properties of Medium Density Fiberboard Produced From Eucalyptus camaldulensis Fibers [Volume 25, Issue 1, 2010, Pages 1-10]
Golbabaei, Fardad
The effects of steaming time, press time and resin content on MDF properties [Volume 25, Issue 1, 2010, Pages 11-21]
Golbabaei, Fardad
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011, Pages 26-38]
Golbabaei, Fardad
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2018, Pages 157-169]
Golbabaei, Fardad
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2018, Pages 170-186]
Golbabaei, Fardad
Investigation on Size Distribution and Fiber Dimensions of Cornstalks [Volume 24, Issue 1, 2009, Pages 1-14]
Golbabaei, Fardad
Investigation of physical and mechanical properties of paulownia wood in particleboard Industry [Volume 24, Issue 1, 2009, Pages 15-25]
Golbabaei, Fardad
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009, Pages 167-182]
Golbabaei, Fardad
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009, Pages 183-193]
Golbabaei, Fardad
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008, Pages 91-101]
Golbabaei, Fardad
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007, Pages 41-50]
Golbabaei, Fardad
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1996, Pages 50-110]
Golbabaei, Fardad
Investigating the characteristics of strandboard produced from beech veneer residues [Volume 4, 4- No. 181, 1998, Pages 156-212]
Golbabaei, Fardad
Investigation on potential long fibre Pinus eldarica Kraft Pulp [Volume 5, 5-No. 182, 1998, Pages 1-64]
Golbabaei, Fardad
Investigation on Properties of NSSC Pulp from Eucalyptus camaldulensis wood in two habitats of Zagmarz and Fars province [Volume 5, 5-No. 182, 1998, Pages 65-148]
Golbabaei, Fardad
Investigation on pulping potential of Iranian rice straw in the paper industries [Volume 6, 6- No. 183, 1998, Pages 1-77]
Golbabaei, Fardad
Investigation on the utilization of papolar clones grown on Short - rotation age (three years) for particleboard production [Volume 7, 7-No. 199, 1998, Pages 46-89]
Golbabaei, Fardad
Effect of spacing on wood properties and yeild of Two Populus Deltoides clones in safrabasteh (Guilan) [Volume 8, 8- No. 217, 2000, Pages 1-30]
Golbabaei, Fardad
Comparative study on Pulping characteristics of Carpinus betulus and Parotia oersica woods [Volume 9, 9-No. 225, 2000, Pages 1-33]
Golbabaei, Fardad
INVESTIGATION ON THE POTENTIAL OF EUCALYPTUS CAMALDULENSIS WOOD IN PARTICLEBOARD INDUSTRY [Volume 9, 9-No. 225, 2000, Pages 35-109]
Golbabaei, Fardad
Engineering properties of Hornbeam wood in Veisar region [Volume 9, 9-No. 225, 2000, Pages 109-149]
Golbabaei, Fardad
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000, Pages 91-147]
Golbabaei, Fardad
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2001, Pages 1-60]
Golbabaei, Fardad
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2001, Pages 61-123]
Golbabaei, Fardad
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Golbabaei, Fardad
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
Golbabaei, Fardad
PULP AND PAPER PROPERTIES OF EUCALYPTUS MICROTHECA GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-107]
Golbabaei, Fardad
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 14, 14-No. 272, 2002, Pages 1-26]
Golbabaei, Fardad
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2002, Pages 27-47]
Golbabaei, Fardad
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2002, Pages 49-72]
Golbabaei, Fardad
WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN [Volume 15, 15-No. 278, 2002, Pages 1-17]
Golbabaei, Fardad
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 15, 15-No. 278, 2002, Pages 33-60]
Golbabaei, Fardad
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2002, Pages 61-87]
Golbabaei, Fardad
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2003, Pages 1-28]
Golbabaei, Fardad
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2003, Pages 29-55]
Golbabaei, Fardad
VARIATION IN PHYSICAL AND MECHANICAL PROPERTIES OF OAK (QUEREUS EASTANEAEFOLIA C.A. MEY) IN SANGDEH REGION OF CASPIAN FORESTS [Volume 17, 17-No. 300, 2018, Pages 1-26]
Golbabaei, Fardad
EFFECTS OF ENVIRONMENTAL FACTORS ON FORMATION OF LIGNIN IN EUCALYPTUS CAMALDULENSIS DEHN. GROWN IN KHOSESTAN-IRAN [Volume 18, No. 1, 2003, Pages 1-38]
Golbabaei, Fardad
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003, Pages 39-62]
Golbabaei, Fardad
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003, Pages 89-108]
Golbabaei, Fardad
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2004, Pages 219-238]
Golbabaei, Fardad
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004, Pages 1-24]
Golbabaei, Fardad
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004, Pages 25-48]
Golbabaei, Fardad
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN [Volume 19, No., 2, 2004, Pages 175-192]
Golbabaei, Fardad
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004, Pages 211-224]
Golbabaei, Fardad
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM WOOD (CARPINUS BETULUS L.) GROWN AT DIFFERENT ELEVATION OF GOLESTAN FORESTS, IRAN [Volume 19, No., 2, 2004, Pages 259-287]
Golbabaei, Fardad
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005, Pages 65-94]
Golbabaei, Fardad
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006, Pages 9-21]
Golbabaei, Fardad
INVESTIGATION ON UTILIZATION OF COTTON STALK IN PARTICLEBOARD PRODUCTION [Volume 21, No., 2, 2006, Pages 95-104]
Golbabaei, Fardad
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2020, Pages 435-447]
Golbabaei, Fardad
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019, Pages 397-408]
Golbabaei, Fardad
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019, Pages 302-311]
Golbabaei, Fardad
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Golbabaei, Fardad
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020, Pages 138-151]
Golbabaei, Fardad
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Golbabaei, Fardad
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021, Pages 14-25]
Golbabaei, Fardad
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021, Pages 132-143]
Golbabaei, Fardad
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Golbabaei, ّFardad
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
Golchinfar, Meisam
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011, Pages 564-578]
Goli, Mohtaba
The effect of TCF bleaching before and after refining on the CMP pulp properties [Volume 31, Fall 3, 2016, Pages 510-521]
Goli, Mojtaba
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018, Pages 38-49]
Grzeskowiak, Wojciech
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023, Pages 330-340]
Gudarzi, Elham
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015, Pages 578-594]
Gudarzi, Elham
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
H
Haamedi, Sepideh
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Habibi, masoudreza
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2001, Pages 1-60]
Habibi, Masoudreza
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014, Pages 34-43]
Habibi, Masoudreza
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018, Pages 63-75]
Habibi, Masoudreza
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2001, Pages 61-123]
Habibi, Masoudreza
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Habibi, Masoud reza
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2014, Pages 642-653]
Habib Porian, Mohamad Hossien
Identification and Comparison of Organic Chemical Components in Wood and Bark of Hornbeam and Ironwood Wood by GC-MS Methods [Volume 37, Issue 2, 2022, Pages 150-165]
Hadjazi, Sahab
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
Hafezi, Seaid Masoumeh
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Haghighi, Azar
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013, Pages 252-265]
Haghighi Poshtiri, Azar
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017, Pages 300-310]
Hajihassani, Reza
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Hajihassani, Reza
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 390-398]
Hajihassani, Reza
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Hajihassani, Reza
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Hajihassani, Reza
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018, Pages 402-416]
Hajihassani, Reza
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Hajihassani, Reza
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Hajihassani, Reza
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Hajihassani, Reza
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2012, Pages 667-681]
Hajihassani, Reza
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009, Pages 26-35]
Hajihassani, Reza
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009, Pages 194-205]
Hajihassani, Reza
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008, Pages 12-19]
Hajihassani, Reza
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008, Pages 91-101]
Hajihassani, Reza
INVESTIGATION ON THE POTENTIAL OF EUCALYPTUS CAMALDULENSIS WOOD IN PARTICLEBOARD INDUSTRY [Volume 9, 9-No. 225, 2000, Pages 35-109]
Hajihassani, Reza
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003, Pages 39-62]
Hajihassani, Reza
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2006, Pages 255-270]
Hajihassani, Reza
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2020, Pages 435-447]
Hajihassani, Reza
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019, Pages 302-311]
Hajihassani, Reza
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Hajihassani, Reza
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Hajihassani, Reza
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021, Pages 132-143]
Hajihassani, Reza
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021, Pages 218-230]
Hajihassani, Reza
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021, Pages 329-339]
Hajihassani, Reza
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Hajihassani, Reza
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022, Pages 251-260]
Hajihassani, Reza
Evaluation of engineering characteristics of decayed thermo-wood by brown rot fungus [Volume 37, Issue 4, 2022, Pages 306-317]
Hajihassani, Reza
Effect of heat treatment and boric acid impregnation on the properties and fire resistance of poplar and radiata pine wood [Volume 38, Issue 1, 2023, Pages 75-86]
Hajihassani, Reza
Influence of thermally modification of ash and spruce on the functionality of fungal destructive agent (Coniophora puteana) [Volume 38, Issue 3, 2023, Pages 170-180]
Haji hassani, Reza
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2020, Pages 461-474]
Haji hatmlo, Saeid
The Effect of Nano-Wollastonite on Physical and Mechanical Properties of Wood Plastic Composites Made With Sunflower Stem Waste and Alder [Volume 31, Issue 4, 2017, Pages 684-694]
Haji rafiriha, Ehsan
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Hajjarian, Marzieh
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017, Pages 181-192]
Hamasi, Amirhoman
Evaluation of thermal energy and activated carbon production from bagasse pith [Volume 31, Summer 2, 2016, Pages 181-193]
Hamasi, Amir homan
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Hamasi, Amir homan
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2008, Pages 109-120]
Hamasi, Amir homman
Investigation on possibility of making durable paper with imported Eucalyptus pulp [Volume 24, Issue 1, 2009, Pages 44-57]
Hamasi, Amir hooman
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Hamasi, Amir Hooman
Effects of Fungus Trametes versicolor and Coniophora puteana study,on
the Mass loss of Wood/Polypropylene Composites. [Volume 25, Issue 1, 2010, Pages 102-112]
Hamed, Mohammad
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023, Pages 87-99]
Hamedbazzi, Mohammad
The Effect of Decorative Coatings by mixing of Poly Vinyl Acetate and Urea-
Formaldehyde on Physical and Mechanical Properties Particleboard [Volume 30, Summer 2, 2015, Pages 194-206]
Hamedi, Sepideh
Chemical Modification of the xylan extracted from bagasse pith to prepare antibacterial carboxymethyl xylan/chitosan film [Volume 34, Issue 4, 2020, Pages 448-460]
Hamedi, Sepideh
Investigation of fungal contamination in some manuscript of Malek Museum [Volume 36, Issue 2, 2021, Pages 170-178]
Hamzeh, Yahya
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Hamzeh, Yahya
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Hamzeh, Yahya
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015, Pages 330-340]
Hamzeh, Yahya
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016, Pages 58-66]
Hamzeh, Yahya
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Hamzeh, Yahya
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Hamzeh, Yahya
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Hamzeh, Yahya
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Hamzeh, Yahya
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010, Pages 80-90]
Hamzeh, Yahya
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008, Pages 40-49]
Hamzeh, Yahya
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2008, Pages 73-80]
Hamzeh, Yahya
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Hamzeh, Yahya
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
Hamzeh, Yahya
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
Hamzezadeh, Roghayeh
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020, Pages 46-60]
Hasani, Saeed
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015, Pages 243-255]
Hasani, Saeed
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023, Pages 141-154]
Hasani Khorshidi, Fatemeh
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017, Pages 205-214]
Hasanjanzadeh, Hadi
The effect of polyelectrolyte on drainage and soda-AQ pulp strength of rice straw [Volume 29, SPRING 1, 2014, Pages 170-181]
Hasanpoor tichi, Ai
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020, Pages 138-151]
Hasanpoor tichi, Ali
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018, Pages 453-465]
Hasanpoor tichi, Ali
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021, Pages 14-25]
Hasanpoor tichi, Ali
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022, Pages 293-305]
Hashemi, Seyed_Pedram
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2015, Pages 623-632]
Hashemi, Seyyed Peyman
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2015, Pages 623-632]
Hashemi Beygzadmahalleh, Seyyed Pedram
Identify the Chemical Composition of Tobacco Stem Wood Extractives (Nicotiana tabacum L. 'Coker 347')
by Gas Chromatography- Mass Spectrometry [Volume 29, SPRING 1, 2014, Pages 66-57]
Hashemi Beygzadmahalleh, Seyyed Pedram
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015, Pages 525-537]
Hashemi Beygzadmahalleh, Seyyed Peyman
Identify the Chemical Composition of Tobacco Stem Wood Extractives (Nicotiana tabacum L. 'Coker 347')
by Gas Chromatography- Mass Spectrometry [Volume 29, SPRING 1, 2014, Pages 66-57]
Hashemi Beygzadmahalleh, Seyyed Peyman
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015, Pages 525-537]
Hashemi Beygzadmahalleh, Seyyed Peyman
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Hassani khorshidi, fatemeh
An Investigation into the Effect of Moisture Content on Adhesion strength of Half-polyester and Polyurethane Clear Paints Applied to Wood Surface [Volume 33, Issue 4, 2019, Pages 511-521]
Hassan poor, Arash
Effects of Fungus Trametes versicolor and Coniophora puteana study,on
the Mass loss of Wood/Polypropylene Composites. [Volume 25, Issue 1, 2010, Pages 102-112]
Hatamzadeh, Elham
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015, Pages 466-474]
Hatamzadeh Arabi, Elham
Effect of insitu synthesis of zinc oxide nanoparticles on the mechanical and biological properties of a wood-polymer composite [Volume 31, Issue 4, 2017, Pages 566-576]
Hatefnia, Hamid
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014, Pages 493-501]
Hatefnia, Hamid
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Hatefnia, Hamid
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Hatefnia, Hamid
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022, Pages 217-228]
Hedjazi, Sahab
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Hedjazi, Sahab
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018, Pages 391-401]
Hedjazi, Sahab
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Hedjazi, Sahab
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Heidari, Somayeh
Effect of Coating on Paper made from bagasse soda pulp
with Biodegradable Polymer [Volume 31, Summer 2, 2016, Pages 204-210]
Hejazi, Sahab
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015, Pages 46-59]
Hejazi, Sahab
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015, Pages 606-617]
Hejazi, Sahab
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016, Pages 78-91]
Hejazi, Sahab
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016, Pages 30-39]
Hejazi, Sahab
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016, Pages 500-509]
Hejazi, Sahab
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017, Pages 94-105]
Hejazi, Sahab
Investigation on Neutral Sulfite Semi-Chemical Pulping of Reapseed (Canola) Residues [Volume 25, Issue 1, 2010, Pages 113-127]
Hemasi, Amir Hooman
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021, Pages 78-89]
Hematabadi, Hojat
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Hemati, Ahmad
Effect of spacing on wood properties and yeild of Two Populus Deltoides clones in safrabasteh (Guilan) [Volume 8, 8- No. 217, 2000, Pages 1-30]
Hemmasi, Amir homan
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015, Pages 207-219]
Hemmasi, Amir Homan
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016, Pages 92-104]
Hemmasi, Amir Homan
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017, Pages 193-204]
Hemmasi, Amir Homan
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023, Pages 141-154]
Hemmasi, Amirhooman
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Hemmasi, Amirhooman
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021, Pages 182-193]
Hemmasi, Amir Hooman
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015, Pages 632-652]
Hemmasi, Amir Hooman
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Hemmasi, Amir Hooman
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Hemmasi, Amir Hooman
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021, Pages 64-77]
Hemmasi, Amir Hooman
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021, Pages 105-118]
Hemmasi, Amir Hooman
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021, Pages 256-263]
Hemmasi, Amir Hooman
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021, Pages 283-292]
Hemmasi, Amir Hooman
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Hemmasi, Amir houman
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Heydari, Vahid
Investigation of the use of chitosan and carboxylic acids as a substitute for urea formaldehyde adhesive in medium density fiberboard [Volume 36, Issue 1, 2021, Pages 53-63]
Hezbi, Nazbakht
Investigation on the effect of endoglucanase enzyme treatment time
and refining to improve OCC pulp properties [Volume 28, Issue 3, 2013, Pages 417-434]
Hezbi, Nazbakht
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014, Pages 254-265]
HojatiMarvast, Ebrahim
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2014, Pages 732-741]
Honarparvar, Farhang
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Hoseinpour, Samad
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022, Pages 59-72]
Hoseinzadeh, Fahimeh
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018, Pages 142-154]
Hossein, Kermanian
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018, Pages 25-37]
Hossein, Mohammad ali
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Hossein, Mohammad Ali
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Hosseini, Behzad
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019, Pages 387-396]
Hosseini, Sayed mohammad
Decay resistance of propionylated Iranian beech wood against white rot
fungus (Trametes versicolor) [Volume 27, Issue 2, 2012, Pages 319-325]
Hosseini, Sayed mohammad
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012, Pages 338-347]
Hosseini, Sayed zya aldin
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008, Pages 83-90]
Hosseini, Sayed Zyae Aldin
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2004, Pages 185-204]
Hosseini, Sead behnam
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016, Pages 78-91]
Hosseini, Seaid ali
Study of Relationship of Aligning Marketing Strategies and Organizational Performance With the mediator role of Supply Chain Performance.Case study: Office Furniture Production Industrial Corporations in Tehran. [Volume 31, Fall 3, 2016, Pages 522-540]
Hosseini, Seyedeh Zahra
Effects of waste polyester fibers on the mechanical and thermal properties of WPC products [Volume 30, WINTER 4, 2015, Pages 552-566]
Hosseini, Syed zyaldin
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 69-79]
Hosseini fard, Mohammad saleh
Investigation on Effect of cement Types on the cement hydration and properties of wood-cement composites manufactured from sunflower stalk(Helianthus Annuus) [Volume 31, Summer 2, 2016, Pages 336-348]
Hosseini Fard, Mohammad Saleh
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015, Pages 173-181]
Hosseinihashemi, Seyyed Khalil
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017, Pages 422-435]
Hosseinihashemi, Seyyed Khalil
Extraction and Identification of Chemical Composition within Acetone Extract of Taxus baccata L. Bark [Volume 33, Issue 1, 2018, Pages 88-99]
Hosseinihashemi, Seyyed Khalil
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Hosseinihashemi, Seyyed Khalil
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Hosseinihashemi, Seyyed Khalil
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Hosseini hashemi, sayed Khalil
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Hosseini hashemi, Sayed khalil
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Hosseini hashemi, seid khalil
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Hosseini Hashemi, Seid Khalil
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015, Pages 243-255]
Hosseinkhani, Hossein
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Hosseinkhani, Hossein
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Hosseinkhani, Hossein
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014, Pages 324-334]
Hosseinkhani, Hossein
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2015, Pages 633-643]
Hosseinkhani, Hossein
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Hosseinkhani, Hossein
MDF Production from Date Palm Pruning Residues in Pilot plant Scale [Volume 29, WINTER 4, 2015, Pages 594-608]
Hosseinkhani, Hossein
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015, Pages 60-71]
Hosseinkhani, Hossein
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012, Pages 664-676]
Hosseinkhani, Hossein
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Hosseinkhani, Hossein
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Hosseinkhani, Hossein
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012, Pages 51-68]
Hosseinkhani, Hossein
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Hosseinkhani, Hossein
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011, Pages 58-71]
Hosseinkhani, Hossein
The effects of steaming time, press time and resin content on MDF properties [Volume 25, Issue 1, 2010, Pages 11-21]
Hosseinkhani, Hossein
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2018, Pages 157-169]
Hosseinkhani, Hossein
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2018, Pages 170-186]
Hosseinkhani, Hossein
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009, Pages 183-193]
Hosseinkhani, Hossein
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008, Pages 20-39]
Hosseinkhani, Hossein
The effect of press time and resin content on properties of MDF produced
from Rice straw [Volume 22, Issue 1, 2007, Pages 51-61]
Hosseinkhani, Hossein
Investigating on the possibility of making particleboard from lignocellulosic sources on southern of Iran (Potential for using wood tamarix in particleboard industries). [Volume 7, 7-No. 199, 1998, Pages 1-45]
Hosseinkhani, Hossein
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2001, Pages 1-60]
Hosseinkhani, Hossein
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 14, 14-No. 272, 2002, Pages 1-26]
Hosseinkhani, Hossein
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 15, 15-No. 278, 2002, Pages 33-60]
Hosseinkhani, Hossein
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2002, Pages 61-87]
Hosseinkhani, Hossein
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2003, Pages 1-28]
Hosseinkhani, Hossein
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2003, Pages 29-55]
Hosseinkhani, Hossein
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2003, Pages 73-93]
Hosseinkhani, Hossein
AN INVESTIGATION ON DAMAGE OF AEOLESTHES SARTA SOLSKY ON INDUSTRIAL TIMBER IN IRAN [Volume 17, 17-No. 300, 2018, Pages 73-95]
Hosseinkhani, Hossein
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003, Pages 77-88]
Hosseinkhani, Hossein
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2004, Pages 219-238]
Hosseinkhani, Hossein
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004, Pages 225-242]
Hosseinkhani, Hossein
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005, Pages 1-22]
Hosseinpoor, Reza
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Hossein poor, Yadolah
Evaluation the effect of kiln schedule on warp and surface checking in beech
(fagus orientalis Lipsky) at 5 cm thickness [Volume 26, Issue 2, 2011, Pages 352-370]
Hossein zade, Jaber
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015, Pages 653-661]
Hosseinzadeh, Abdilrahman
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1987, Pages 1-115]
Hosseinzadeh, Abdolrahman
Investigation on the Effect of UF resin polymerization variable on strength of Uf bonded Hornbeam particleboard [Volume 1, Issue 148, 1996, Pages 1-53]
Hosseinzadeh, Abdolrahman
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1996, Pages 50-110]
Hosseinzadeh, Abdolrahman
Acidity and buffering capacity of Iranian Woods [Volume 2, 2- No 166, 1987, Pages 116-151]
Hosseinzadeh, Abdolrahman
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1987, Pages 152-188]
Hosseinzadeh, Abdolrahman
Investigation on acoustical properties of wood [Volume 3, 3- No. 174, 1997, Pages 1-131]
Hosseinzadeh, Abdolrahman
Investigating on the effect of wood pH on particleboard properties [Volume 4, 4- No. 181, 1998, Pages 51-155]
Hosseinzadeh, Abdolrahman
Investigation on the Effect of strandboard production variables on strand characteristics [Volume 4, 4- No. 181, 1998, Pages 1-50]
Hosseinzadeh, Abdolrahman
Investigating the characteristics of strandboard produced from beech veneer residues [Volume 4, 4- No. 181, 1998, Pages 156-212]
Hosseinzadeh, Abdolrahman
Investigation on potential long fibre Pinus eldarica Kraft Pulp [Volume 5, 5-No. 182, 1998, Pages 1-64]
Hosseinzadeh, Abdolrahman
Investigation on Properties of NSSC Pulp from Eucalyptus camaldulensis wood in two habitats of Zagmarz and Fars province [Volume 5, 5-No. 182, 1998, Pages 65-148]
Hosseinzadeh, Abdolrahman
Investigation on pulping potential of Iranian rice straw in the paper industries [Volume 6, 6- No. 183, 1998, Pages 1-77]
Hosseinzadeh, Abdolrahman
Investigation on organosolv pulping of wheat straw [Volume 6, 6- No. 183, 1998, Pages 78-160]
Hosseinzadeh, Abdolrahman
Investigating on the possibility of making particleboard from lignocellulosic sources on southern of Iran (Potential for using wood tamarix in particleboard industries). [Volume 7, 7-No. 199, 1998, Pages 1-45]
Hosseinzadeh, Abdolrahman
Investigation on the utilization of papolar clones grown on Short - rotation age (three years) for particleboard production [Volume 7, 7-No. 199, 1998, Pages 46-89]
Hosseinzadeh, Abdolrahman
Effect of spacing on wood properties and yeild of Two Populus Deltoides clones in safrabasteh (Guilan) [Volume 8, 8- No. 217, 2000, Pages 1-30]
Hosseinzadeh, Abdolrahman
Comparative study on Pulping characteristics of Carpinus betulus and Parotia oersica woods [Volume 9, 9-No. 225, 2000, Pages 1-33]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON THE POTENTIAL OF EUCALYPTUS CAMALDULENSIS WOOD IN PARTICLEBOARD INDUSTRY [Volume 9, 9-No. 225, 2000, Pages 35-109]
Hosseinzadeh, Abdolrahman
Engineering properties of Hornbeam wood in Veisar region [Volume 9, 9-No. 225, 2000, Pages 109-149]
Hosseinzadeh, Abdolrahman
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000, Pages 1-90]
Hosseinzadeh, Abdolrahman
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000, Pages 91-147]
Hosseinzadeh, Abdolrahman
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2001, Pages 1-60]
Hosseinzadeh, Abdolrahman
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2001, Pages 61-123]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2001, Pages 39-72]
Hosseinzadeh, Abdolrahman
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Hosseinzadeh, Abdolrahman
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
Hosseinzadeh, Abdolrahman
PULP AND PAPER PROPERTIES OF EUCALYPTUS MICROTHECA GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-107]
Hosseinzadeh, Abdolrahman
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 14, 14-No. 272, 2002, Pages 1-26]
Hosseinzadeh, Abdolrahman
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2002, Pages 27-47]
Hosseinzadeh, Abdolrahman
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2002, Pages 49-72]
Hosseinzadeh, Abdolrahman
THE COMPARISON OF FIBER BIOMETRY AND CHEMICAL COMPONENTS OF PHRAGMITES AUSTRALIS FOR PAPERMAKING [Volume 14, 14-No. 272, 2002, Pages 73-109]
Hosseinzadeh, Abdolrahman
WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN [Volume 15, 15-No. 278, 2002, Pages 1-17]
Hosseinzadeh, Abdolrahman
JUNIPERUS EXELSA L.: WOOD STRUCTURE AND PHYSICAL PROPERTIES IN IRANO-TORANI REGION [Volume 15, 15-No. 278, 2002, Pages 20-31]
Hosseinzadeh, Abdolrahman
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 15, 15-No. 278, 2002, Pages 33-60]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2002, Pages 61-87]
Hosseinzadeh, Abdolrahman
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2003, Pages 1-28]
Hosseinzadeh, Abdolrahman
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2003, Pages 29-55]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2003, Pages 73-93]
Hosseinzadeh, Abdolrahman
VARIATION IN PHYSICAL AND MECHANICAL PROPERTIES OF OAK (QUEREUS EASTANEAEFOLIA C.A. MEY) IN SANGDEH REGION OF CASPIAN FORESTS [Volume 17, 17-No. 300, 2018, Pages 1-26]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2018, Pages 27-56]
Hosseinzadeh, Abdolrahman
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2018, Pages 57-72]
Hosseinzadeh, Abdolrahman
EFFECTS OF ENVIRONMENTAL FACTORS ON FORMATION OF LIGNIN IN EUCALYPTUS CAMALDULENSIS DEHN. GROWN IN KHOSESTAN-IRAN [Volume 18, No. 1, 2003, Pages 1-38]
Hosseinzadeh, Abdolrahman
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003, Pages 39-62]
Hosseinzadeh, Abdolrahman
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003, Pages 63-76]
Hosseinzadeh, Abdolrahman
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003, Pages 77-88]
Hosseinzadeh, Abdolrahman
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003, Pages 89-108]
Hosseinzadeh, Abdolrahman
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003, Pages 109-133]
Hosseinzadeh, Abdolrahman
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2004, Pages 155-184]
Hosseinzadeh, Abdolrahman
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2004, Pages 205-218]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2004, Pages 219-238]
Hosseinzadeh, Abdolrahman
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2004, Pages 239-267]
Hosseinzadeh, Abdolrahman
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004, Pages 1-24]
Hosseinzadeh, Abdolrahman
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004, Pages 49-68]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004, Pages 69-98]
Hosseinzadeh, Abdolrahman
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004, Pages 97-114]
Hosseinzadeh, Abdolrahman
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004, Pages 115-131]
Hosseinzadeh, Abdolrahman
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005, Pages 65-94]
Hosseinzadeh, Abdolrahman
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005, Pages 95-110]
Hosseinzadeh, Abdolrahman
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005, Pages 111-132]
Hosseinzadeh, Abdolrahman
INVESTIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R.T.BAKER) AGAINST TRAMETES VERSICOLOR L.EX [Volume 20, No., 1, 2005, Pages 133-142]
Hosseinzadeh, Omid
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017, Pages 181-192]
Hosseinzadeh, Omid
Investigation on the influence of cooking intensity on strength
properties of bagasse soda pulp [Volume 24, Issue 2, 2009, Pages 275-284]
Hosseinzadeh, Omid
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2019, Pages 522-530]
Hosseinzadeh, Sarveh
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2014, Pages 763-773]
I
Ibaghi esfahani, Hamid
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017, Pages 157-170]
Ibaghi esfahani, Hamid
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018, Pages 218-230]
Imani, Mohammad Naghi
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023, Pages 1-20]
Imani, Reza
Application of nano silver in the production of antibacterial banknote paper [Volume 31, SPRING 1, 2016, Pages 166-179]
Iron, Zeynab
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Ismaeilimoghadam, Saeid
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015, Pages 674-689]
Ismaeilimoghadam, Saeid
Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor) [Volume 31, SPRING 1, 2016, Pages 14-29]
Izadyar, Soheila
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Izadyar, Soheila
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020, Pages 246-258]
J
Jadidi, Mania
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012, Pages 409-422]
Jadidyan, Fatemeh
Evaluation of thermal energy and activated carbon production from bagasse pith [Volume 31, Summer 2, 2016, Pages 181-193]
Jafari, Mohammad taghi
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022, Pages 73-85]
Jafari, Mostafa
A new approach to dendroecological studies: Climate change impact on forest’ wood production in Astara (Gilan) [Volume 27, WINTER 4, 2012, Pages 690-706]
Jafari, Mostafa
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 27, Issue 3, 2012, Pages 386-408]
Jafari, Mostafa
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 30, Fall 3, 2015, Pages 386-408]
Jafari Mofidabadi, Amirhosein
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021, Pages 231-242]
Jafari petroudi, Rahman
Effect of Alkali Oxidation of fiber on characteristic of virgin and recycled pulp [Volume 38, Issue 4, 2023, Pages 316-329]
Jafari Petroudy, SeyedRahman
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015, Pages 1-13]
Jafrai, Mohammad taghi
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021, Pages 317-328]
Jahani, Yosef
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2015, Pages 581-593]
Jahanilomer, Zahra
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014, Pages 376-389]
Jahani lomer, Zahra
An Intelligent Neural Networks System for Prediction of particleboard properties [Volume 29, Summer 2, 2014, Pages 242-253]
Jahanlatibari, Ahmad
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Jahan latibari, Ahmad
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2015, Pages 526-237]
Jahan latibari, Ahmad
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Jahan latibari, Ahmad
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015, Pages 26-36]
Jahan latibari, Ahmad
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015, Pages 183-193]
Jahan latibari, Ahmad
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012, Pages 522-535]
Jahan latibari, Ahmad
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Jahan latibari, Ahmad
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Jahan latibari, Ahmad
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Jahan latibari, Ahmad
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Jahan latibari, Ahmad
Investigation on production of bleachable chemi-mechanical pulp from
wheat straw [Volume 26, Issue 4, 2012, Pages 634-646]
Jahan latibari, Ahmad
Investigation on Neutral Sulfite Semi-Chemical Pulping of Reapseed (Canola) Residues [Volume 25, Issue 1, 2010, Pages 113-127]
Jahan latibari, Ahmad
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2018, Pages 187-200]
Jahan latibari, Ahmad
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2018, Pages 275-290]
Jahan latibari, Ahmad
Investigation on the influence of cooking intensity on strength
properties of bagasse soda pulp [Volume 24, Issue 2, 2009, Pages 275-284]
Jahan latibari, Ahmad
Inestigation on withdrawal strength and moment resistance of mortise
and tenon joint [Volume 24, Issue 2, 2009, Pages 285-294]
Jahan latibari, Ahmad
Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard [Volume 23, Issue 1, 2008, Pages 50-62]
Jahan latibari, Ahmad
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007, Pages 1-17]
Jahan latibari, Ahmad
Investigation on the Effect of UF resin polymerization variable on strength of Uf bonded Hornbeam particleboard [Volume 1, Issue 148, 1996, Pages 1-53]
Jahan latibari, Ahmad
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1996, Pages 50-110]
Jahan latibari, Ahmad
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1987, Pages 1-115]
Jahan latibari, Ahmad
Acidity and buffering capacity of Iranian Woods [Volume 2, 2- No 166, 1987, Pages 116-151]
Jahan latibari, Ahmad
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1987, Pages 152-188]
Jahan latibari, Ahmad
Investigating on the effect of wood pH on particleboard properties [Volume 4, 4- No. 181, 1998, Pages 51-155]
Jahan latibari, Ahmad
Investigation on the Effect of strandboard production variables on strand characteristics [Volume 4, 4- No. 181, 1998, Pages 1-50]
Jahan latibari, Ahmad
Investigating the characteristics of strandboard produced from beech veneer residues [Volume 4, 4- No. 181, 1998, Pages 156-212]
Jahan latibari, Ahmad
Investigation on potential long fibre Pinus eldarica Kraft Pulp [Volume 5, 5-No. 182, 1998, Pages 1-64]
Jahan latibari, Ahmad
Investigation on Properties of NSSC Pulp from Eucalyptus camaldulensis wood in two habitats of Zagmarz and Fars province [Volume 5, 5-No. 182, 1998, Pages 65-148]
Jahan latibari, Ahmad
Investigation on pulping potential of Iranian rice straw in the paper industries [Volume 6, 6- No. 183, 1998, Pages 1-77]
Jahan latibari, Ahmad
Investigation on organosolv pulping of wheat straw [Volume 6, 6- No. 183, 1998, Pages 78-160]
Jahan latibari, Ahmad
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000, Pages 1-90]
Jahan latibari, Ahmad
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [Volume 12, 12-No. 251, 2001, Pages 1-38]
Jahan latibari, Ahmad
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2002, Pages 61-87]
Jahan latibari, Ahmad
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2003, Pages 73-93]
Jahan latibari, Ahmad
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2004, Pages 185-204]
Jahan latibari, Ahmad
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004, Pages 25-48]
Jahan latibari, Ahmad
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004, Pages 49-68]
Jahan latibari, Ahmad
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005, Pages 95-110]
Jahan latibari, Ahmad
INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING [Volume 20, No., 2, 2006, Pages 169-184]
Jahan latibari, Ahmad
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006, Pages 22-32]
Jahan latibari, Ahmad
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006, Pages 78-94]
Jahan latibari, Ahmad
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021, Pages 194-204]
Jahan latibari, Ahmad
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Jahan latibari, Ahmad
Adhesive Modification and Improvement of Properties of Polyvinyl Acetate Using Nano silica [Volume 38, Issue 2, 2023, Pages 128-140]
Jahan latibari, Ahmad
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024, Pages 71-82]
Jahan latibari, Ahmad
Identifying and prioritizing the components of sustainable production in the corrugated box making industry [Volume 38, Issue 1, 2023, Pages 21-36]
Jahan latibari, Ahmad
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Jahan Latibari, Ahmad
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Jahan Latibari, Ahmad
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Jahan Latibari, Ahmad
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Jahan Latibari, Ahmad
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Jahan Latibari, Ahmad
Comparative Investigation on the properties of Soda and Soda-Ethanol pulps from three hardwoods [Volume 30, Fall 3, 2015, Pages 399-407]
Jahan Latibari, Ahmad
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015, Pages 243-255]
Jahan Latibari, Ahmad
The effect of moisture content and storage time of Bagasse on particleboard physical and mechanical properties [Volume 32, Issue 4, 2017, Pages 541-552]
Jahan Latibari, Ahmad
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Jahan Latibari, Ahmad
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Jahan Latibari, Ahmad
Investigating the properties of medium density fiberboard from
licorice root residues [Volume 27, Issue 3, 2012, Pages 471-482]
Jahan Latibari, Ahmad
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021, Pages 340-355]
Jahan - Latibari, Ahmad
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Jahan - Latibari, Ahmad
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017, Pages 287-299]
Jahan - Latibari, Ahmad
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011, Pages 232-242]
Jahan - Latibari, Ahmad
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Jahan - Latibari, Ahmad
Investigation on Size Distribution and Fiber Dimensions of Cornstalks [Volume 24, Issue 1, 2009, Pages 1-14]
Jahan-Latibari, Ahmad
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Jahan-Latibari, Ahmad
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Jahan-Latibari, Ahmad
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012, Pages 635-645]
Jahan- Latibari, Ahmad
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017, Pages 47-56]
Jahan latibary, Ahmad
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Jahanshahlou, Sobhan
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017, Pages 227-237]
Jalali tarshizy, Hossein
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Jalalitorshizi, Hosein
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018, Pages 12-24]
Jalali Torshizi, Hossein
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017, Pages 215-226]
Jalali Torshizi, Hossein
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017, Pages 498-508]
Jalali Torshizi, Hossein
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Jalali Torshizi, Hossein
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019, Pages 1-11]
Jalali-Torshizi, Hossein
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Jalali-Torshizi, Hossein
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Jalali-Torshizi, Hossein
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Jalali trshizi, Hossein
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015, Pages 618-631]
Jalali trshizy, Hossein
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Jalalvand, Sahar
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Jalili, Mohammad mehdi
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011, Pages 314-325]
Jalili, Mohammad mehdi
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Jalilvand, Hamid
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Jalilvand, Mehran
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2012, Pages 798-810]
Jalilvand, Mehran
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2008, Pages 81-98]
Jamail, Reza
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015, Pages 26-36]
Jamalirad, Laya
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016, Pages 78-91]
Jamalirad, Laya
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016, Pages 30-39]
Jamalirad, Laya
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016, Pages 500-509]
Jamalirad, Laya
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Jamalirad, Loya
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021, Pages 1-13]
Jamshedzadeh, Mehdi
Comparing the mechanical strength of wooden chairs constructed using two patterns and mortise and tenon and dowel joints [Volume 29, SPRING 1, 2014, Pages 67-78]
Javid, Ahmad
Study of thermal fatigue on the cracking, adhesion and gloss properties of wood coatings [Volume 36, Issue 2, 2021, Pages 119-131]
Jazayeri, Reza
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
Jazayeri, Reza
Possibility of manufacturing particleboard with Acacia salicina [Volume 23, Issue 2, 2008, Pages 169-177]
Jazayeri, Reza
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2021, Pages 348-361]
Jazayeri, Reza
Effect of heat treatment and boric acid impregnation on the properties and fire resistance of poplar and radiata pine wood [Volume 38, Issue 1, 2023, Pages 75-86]
Jazayeri, Reza
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023, Pages 100-113]
Jodi, Hamid
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Jonobi, Mehdi
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016, Pages 58-66]
Jonobi, Mehdi
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Jonobi, Mehdi
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
Jonoobi, Mehdi
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017, Pages 300-310]
Jonoobi, Mehdi
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Jonoobi, Mehdi
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2019, Pages 531-543]
Jourbandian, Amin
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023, Pages 237-249]
K
Kabodi torabi, Nadia
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Kahvand, Mohammad
Tensile and compressive load-bearing capacity of combined stresses investigated in connection with built-lingual Corner 45 ° Mobile [Volume 30, Summer 2, 2015, Pages 308-319]
Kalagar, Mehdei
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Kalagar, Mehdei
Investigation on the tensile properties and dimensional stability of polypropylene/wheat straw fiber/paper mill sludge composites [Volume 31, SPRING 1, 2016, Pages 67-77]
Kalagar, Mehdi
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014, Pages 230-241]
Kalagar, Mehdi
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015, Pages 207-219]
Kalagar, Mehdi
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017, Pages 157-170]
Kamrani, Saeid
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Kamrani, Saeid
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010, Pages 32-47]
Karami motaghi, Lila
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014, Pages 324-334]
Karegarfard, Abolfazl
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Karegarfard, Abolfazl
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Karegarfard, Abolfazl
Investigation on the effect of press temperature and time on physical and
mechanical properties corn stalk MDF [Volume 28, SPRING 1, 2013, Pages 97-108]
Karegarfard, Abolfazl
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Karegarfard, Abolfazl
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Karegarfard, Abolfazl
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Kargarfard, Abolfazl
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013, Pages 381-391]
Kargarfard, Abolfazl
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2014, Pages 628-641]
Kargarfard, Abolfazl
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
Kargarfard, Abolfazl
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
Kargarfard, Abolfazl
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Kargarfard, Abolfazl
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015, Pages 85-96]
Kargarfard, Abolfazl
The Effect of Decorative Coatings by mixing of Poly Vinyl Acetate and Urea-
Formaldehyde on Physical and Mechanical Properties Particleboard [Volume 30, Summer 2, 2015, Pages 194-206]
Kargarfard, Abolfazl
The Investigation of the Utilization Impact of
Alnus subcordata Waste and Poplar Wood in Particle Board Production [Volume 30, SPRING 1, 2015, Pages 37-45]
Kargarfard, Abolfazl
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015, Pages 434-446]
Kargarfard, Abolfazl
Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard [Volume 31, Issue 4, 2017, Pages 557-568]
Kargarfard, Abolfazl
The Investigation of Press Temperature and Time on Properties of Medium Density Fiberboard Produced From Cotton Stalks Fibers [Volume 31, Summer 2, 2016, Pages 194-203]
Kargarfard, Abolfazl
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016, Pages 154-165]
Kargarfard, Abolfazl
Investigation on Effect of cement Types on the cement hydration and properties of wood-cement composites manufactured from sunflower stalk(Helianthus Annuus) [Volume 31, Summer 2, 2016, Pages 336-348]
Kargarfard, Abolfazl
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017, Pages 251-260]
Kargarfard, Abolfazl
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017, Pages 462-472]
Kargarfard, Abolfazl
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Kargarfard, Abolfazl
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018, Pages 155-165]
Kargarfard, Abolfazl
Influence of rose flower stem residues on the properties of poplar
wood particleboard [Volume 27, Issue 3, 2012, Pages 483-494]
Kargarfard, Abolfazl
Effects of acetylation and press time on heat transfer in particleboard
mat from Hornbeam wood (Carpinus betulus) [Volume 27, Issue 3, 2012, Pages 510-521]
Kargarfard, Abolfazl
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Kargarfard, Abolfazl
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Kargarfard, Abolfazl
Investigation on physical and mechanical properties of medium density
fiberboard produced from Eucalyptus steriaticalyx fibers [Volume 27, Issue 1, 2012, Pages 89-99]
Kargarfard, Abolfazl
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Kargarfard, Abolfazl
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011, Pages 291-299]
Kargarfard, Abolfazl
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2012, Pages 667-681]
Kargarfard, Abolfazl
Investigation on Physical and Mechanical Properties of Medium Density Fiberboard Produced From Eucalyptus camaldulensis Fibers [Volume 25, Issue 1, 2010, Pages 1-10]
Kargarfard, Abolfazl
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011, Pages 26-38]
Kargarfard, Abolfazl
Investigation on Utilization of Corn stalk In Particleboard Production [Volume 25, Issue 2, 2018, Pages 147-156]
Kargarfard, Abolfazl
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2018, Pages 170-186]
Kargarfard, Abolfazl
Investigation of physical and mechanical properties of paulownia wood in particleboard Industry [Volume 24, Issue 1, 2009, Pages 15-25]
Kargarfard, Abolfazl
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009, Pages 26-35]
Kargarfard, Abolfazl
Investigation on the utilization of pomegranate wood for particleboard production [Volume 24, Issue 1, 2009, Pages 158-166]
Kargarfard, Abolfazl
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009, Pages 167-182]
Kargarfard, Abolfazl
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008, Pages 1-11]
Kargarfard, Abolfazl
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008, Pages 91-101]
Kargarfard, Abolfazl
Possibility of manufacturing particleboard with Acacia salicina [Volume 23, Issue 2, 2008, Pages 169-177]
Kargarfard, Abolfazl
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007, Pages 41-50]
Kargarfard, Abolfazl
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1996, Pages 50-110]
Kargarfard, Abolfazl
Acidity and buffering capacity of Iranian Woods [Volume 2, 2- No 166, 1987, Pages 116-151]
Kargarfard, Abolfazl
Investigating on the effect of wood pH on particleboard properties [Volume 4, 4- No. 181, 1998, Pages 51-155]
Kargarfard, Abolfazl
Investigating on the possibility of making particleboard from lignocellulosic sources on southern of Iran (Potential for using wood tamarix in particleboard industries). [Volume 7, 7-No. 199, 1998, Pages 1-45]
Kargarfard, Abolfazl
INVESTIGATION ON THE POTENTIAL OF EUCALYPTUS CAMALDULENSIS WOOD IN PARTICLEBOARD INDUSTRY [Volume 9, 9-No. 225, 2000, Pages 35-109]
Kargarfard, Abolfazl
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2002, Pages 27-47]
Kargarfard, Abolfazl
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2002, Pages 49-72]
Kargarfard, Abolfazl
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2002, Pages 61-87]
Kargarfard, Abolfazl
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2018, Pages 27-56]
Kargarfard, Abolfazl
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003, Pages 39-62]
Kargarfard, Abolfazl
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004, Pages 1-24]
Kargarfard, Abolfazl
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004, Pages 49-68]
Kargarfard, Abolfazl
UTILIZATION OF GRAPE PRUNINGS RESIDUES IN PRODUCTION OF PARTICLEBOARD [Volume 19, No., 2, 2004, Pages 159-174]
Kargarfard, Abolfazl
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004, Pages 211-224]
Kargarfard, Abolfazl
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005, Pages 47-64]
Kargarfard, Abolfazl
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005, Pages 95-110]
Kargarfard, Abolfazl
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005, Pages 111-132]
Kargarfard, Abolfazl
INVESTIGATION ON UTILIZATION OF COTTON STALK IN PARTICLEBOARD PRODUCTION [Volume 21, No., 2, 2006, Pages 95-104]
Kargarfard, Abolfazl
THE EFFECTS OF DENSITY AND PRESS TIME ON POPLAR INSULATION PARTICLEBOARD PROPERTIES [Volume 21, No., 2, 2006, Pages 115-122]
Kargarfard, Abolfazl
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2020, Pages 461-474]
Kargarfard, Abolfazl
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Kargarfard, Abolfazl
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2021, Pages 348-361]
Karimi, Alinaghi
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2014, Pages 732-741]
Karimi, Alinaghi
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Karimi, Alinaghi
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011, Pages 477-485]
Karimi, Alinaghi
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2018, Pages 211-222]
Karimi, Alinaghi
Study on Mechanical Properties of Composites Made From Sander Dust of Particleboard-Polypropylene [Volume 24, Issue 1, 2009, Pages 58-68]
Karimi, Alinaghi
Chemical structure elucidation of milled wood lignin and cellulytic lignin from Poplar [Volume 23, Issue 2, 2008, Pages 102-122]
Karimi, Alinaghi
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007, Pages 18-28]
Karimi, Alinaghi
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2008, Pages 73-80]
Karimi, Ali naghi
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010, Pages 70-79]
Karimi, Ali Naghi
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017, Pages 300-310]
Karimi, Ali nagi
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013, Pages 252-265]
Kazemi, Mahmood
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012, Pages 361-371]
Kazemi, Mahmood
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012, Pages 69-80]
Kazemi, Rahim
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Kazemi, Saeid
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2008, Pages 109-120]
Kazemi, Sayed mahmood
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2008, Pages 81-98]
Kazemi, Sayed mahmood
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2004, Pages 139-154]
Kazemi, Seid Mahmood
Field Test on Resistance of Alder and Horn Beech At Coastal waters of Amirabad port in Caspian Sea [Volume 27, WINTER 4, 2012, Pages 717-730]
Kazemi Karchegini, negin
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022, Pages 318-329]
Kazemi Karchegini, zahra
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022, Pages 318-329]
Kazeminajafi, Saeid
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2006, Pages 271-284]
Kazemi najafi, Saeid
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011, Pages 454-465]
Kazemi najafi, Saeid
Effect of Beech bark Content on Physical and Mechanical Properties
of Bark Flour-Polypropylene Composites [Volume 26, Issue 4, 2012, Pages 811-823]
Kazemi najafi, Saeid
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009, Pages 315-321]
Kazemi najafi, Saeid
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2006, Pages 255-270]
Kazemi najafi, Saeid
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2006, Pages 285-301]
Kazemi najafi, Saeid
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006, Pages 1-8]
Kazemi najafi, Saeid
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006, Pages 33-42]
Kazemi Najafi, Saeed
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023, Pages 100-113]
Kazemi Najafi, Saeid
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Kazemi tabrizi, Ali
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015, Pages 362-375]
Kazemi Tabrizi, Ali
Investigating the effect of using oxygen delignification process on bagasse soda pulp properties [Volume 31, Summer 2, 2016, Pages 261-279]
Kazemi Tabrizi, Ali
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
Kazemi Tabrizi, Ali
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021, Pages 64-77]
Kazemi Tabrizi, Ali
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021, Pages 231-242]
Keimosa, Khashayar
JUNIPERUS EXELSA L.: WOOD STRUCTURE AND PHYSICAL PROPERTIES IN IRANO-TORANI REGION [Volume 15, 15-No. 278, 2002, Pages 20-31]
Kermanian, Hossein
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Kermanian, Hossein
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Kermanian, Hossein
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Kermanian, Hossein
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Keshaavarz, Ashkaan
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Keshtegar, Baratali
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021, Pages 305-316]
Keshtegar, Barat ali
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019, Pages 242-254]
Keshtegar, Bratali
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014, Pages 266-274]
Ketabi, Ehsan
The impact of truss structure on stiffness by finite element method [Volume 32, Issue 1, 2017, Pages 69-82]
Khademeslami, Habib alah
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Khademieslam, Habib alah
Investigation on the tensile properties and dimensional stability of polypropylene/wheat straw fiber/paper mill sludge composites [Volume 31, SPRING 1, 2016, Pages 67-77]
Khademieslam, Habib alah
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2018, Pages 201-210]
Khademieslam, Habibollah
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016, Pages 92-104]
Khademieslam, Habibollah
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2017, Pages 648-661]
Khademi eslam, Habibalah
Evaluation of Natural durability of Horn beam (Carpinus betulus) wood against Coriolus Versicolor in case of Treated with CCA (Tanalith c) [Volume 25, Issue 2, 2018, Pages 260-274]
Khademi eslam, Habibalah
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2008, Pages 109-120]
Khademi eslam, Habib alah
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Khademi eslam, Habib alah
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Khademi eslam, Habib alah
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Khademi eslam, Habib alah
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Khademi eslam, Habib alah
Effects of Fungus Trametes versicolor and Coniophora puteana study,on
the Mass loss of Wood/Polypropylene Composites. [Volume 25, Issue 1, 2010, Pages 102-112]
Khademi eslam, Habib alah
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009, Pages 325-340]
Khademi eslam, Habib alah
Possibility of manufacturing particleboard with Acacia salicina [Volume 23, Issue 2, 2008, Pages 169-177]
Khademi Eslam, Habibollah
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017, Pages 411-421]
Khademi Eslam, Habibollah
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012, Pages 202-211]
Khademi Eslam, Habibollah
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Khademi Eslam, Habibollah
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019, Pages 337-348]
Khademi Eslam, Habibollah
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Khademi Eslam, Habibollah
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
Khademi Eslam, Habibollah
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020, Pages 138-151]
Khademi Eslam, Habibollah
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Khademi Eslam, Habibollah
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021, Pages 64-77]
Khademi Eslam, Habibollah
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021, Pages 78-89]
Khademi Eslam, Habibollah
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021, Pages 105-118]
Khademi Eslam, Habibollah
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021, Pages 293-304]
Khademi Eslam, Habibollah
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Khademi Islam, habibolah
Studying the effect of acetylation Beech on interfacial bonding resistance of transparent paint (nitrocellulose lacquer, asid catalyzed lacquer and Half Ppolyester) [Volume 31, SPRING 1, 2016, Pages 105-117]
Khademislam, Habibalah
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015, Pages 207-219]
Khadmieslam, Hababalah
Investigation on possibility of making durable paper with imported Eucalyptus pulp [Volume 24, Issue 1, 2009, Pages 44-57]
Khajeh ali, Iman
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015, Pages 72-84]
Khajeh Ali, Iman
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016, Pages 349-361]
Khaje-mahmouid, Mostafa
Modification of yellowing caused by oxidation of paper cellulose using Sodium borohydride and Sodium dithionite [Volume 38, Issue 4, 2023, Pages 296-315]
Khaki, Ali
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Khaki, Ali
Evaluation of sandwich panels from palm leaves waste and plywood [Volume 38, Issue 1, 2023, Pages 48-58]
Khakifirooz, Alireza
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Khakifirooz, Alireza
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021, Pages 157-169]
Khakifirooz, Alireza
Investigating the effect of coated cardboard storage in freezer coated with two layers of nano-polyurethane and nano-clay on its physical and mechanical properties [Volume 38, Issue 3, 2023, Pages 205-214]
Khakifirooz, Alireza
Comparison of separate and combined effect of nanosilica and cationic additives on the optical properties of the white packaging liner [Volume 38, Issue 4, 2023, Pages 266-280]
Khakifiroz, Alireza
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011, Pages 429-436]
Khakifiroz, Alireza
Investigation on possibility of making durable paper with imported Eucalyptus pulp [Volume 24, Issue 1, 2009, Pages 44-57]
Khalilian Shalamzari, Mysam
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017, Pages 509-517]
Khalili gasht, Ali
Investigation Produce of Particleboard with use of Bagasse and Haloxylon sp. in [Volume 24, Issue 1, 2009, Pages 99-116]
Khalili gasht rodkhani, Ali
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009, Pages 264-274]
Khalili tabas, Ahmad amin
Increasing the flexural strength capacity of cement composite
with natural fibres [Volume 24, Issue 2, 2009, Pages 206-218]
Khanzadeh, Minoo
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021, Pages 356-367]
Kharazipoor, Alireza
Biotechnology Application in Wood Industry: Utilization of Phenol
Oxidase Enzyme as a Renewable Binder in MDF Manufacture [Volume 27, Issue 2, 2012, Pages 275-293]
Khasipour, Farzin
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Khazaeian, Abolghasem
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Khazaeian, Abolghasem
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Khazaeyan, Abolghasem
Improving the mechanical and physical of wheat straw particleboard using polypropylene powder [Volume 29, Fall 3, 2014, Pages 464-473]
Khazaeyan, Abolghasem
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017, Pages 359-368]
Khodabandehlo, Hamid
Assessment of accelerated aging for thermally upgraded transformer
insulation paper by dicyandiamide [Volume 31, Fall 3, 2016, Pages 446-457]
Khodabandeh lo, Hamid
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015, Pages 653-661]
Khodaparast, Sina
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017, Pages 287-299]
Khodayari, Payam
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012, Pages 676-689]
Khojasteh khosro, Saeid
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Khojasteh Khosro, Saeed
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015, Pages 173-181]
Khojasteh Khosro, Saeed
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015, Pages 132-143]
Khojasteh Khosro, Saeed
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015, Pages 132-143]
Khojasteh Khosro, Saeed
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015, Pages 690-704]
Khojasteh Khosro, Saeed
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016, Pages 248-260]
Khojasteh Khosro, Saeed
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018, Pages 166-178]
Khorami, Morteza
Increasing the flexural strength capacity of cement composite
with natural fibres [Volume 24, Issue 2, 2009, Pages 206-218]
Khorasani, Nematollah
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Khorram Margavi, Khadijeh
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024, Pages 1-11]
Khosravani, Amir
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017, Pages 227-237]
Khosravani, Amir
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2020, Pages 535-546]
Khosravani, Amir
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Khosravani, Amir
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020, Pages 102-112]
Khosravani, Amir
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021, Pages 382-393]
Khosrevani, Yasamin
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007, Pages 18-28]
Kiaei, Majid
Investigation on wood properties of eldar pine and its relations to soil chemical and physical characteristics (in western of Mazandarn province platation) [Volume 29, Summer 2, 2014, Pages 199-207]
Kiaei, Majid
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023, Pages 237-249]
Kiani, Hamedeh
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2019, Pages 579-592]
Kohantorabi, Mostafa
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013, Pages 238-257]
Kohantorabi, Mostafa
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Kohantorabi, Mostafa
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021, Pages 256-263]
Kohan torabi, Mostafa
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Kohpayeh zadeh, Moghgan
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Kolaei Moakhar, Fatemeh
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Koohkan, Hamid Reza
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016, Pages 388-397]
Koosha, Mojtaba
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Kor, Fereshteh
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017, Pages 576-584]
Kord, Behzad
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015, Pages 266-277]
Kord, Behzad
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015, Pages 674-689]
Kord, Behzad
Biodegradation and migration behavior of cellulose nanocrystal - nanoclay reinforced PLA composites [Volume 31, SPRING 1, 2016, Pages 130-140]
Kord, Behzad
Investigation on The Effects of Nanoclay Particles on Mechanical
Properties of Wood Polymer Composites Made of High
Density Polyethylene-Wood Flour [Volume 25, Issue 1, 2010, Pages 91-101]
Kord, Behzad
Effect of Refining Intensity on Pulp and Paper Properties Made of Eucalyptus Camaldulensis Wood [Volume 24, Issue 1, 2009, Pages 124-133]
Kouhpayehzadeh, Moghgan
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
Kshn dehghan, Afshin
Evaluation of Natural durability of Horn beam (Carpinus betulus) wood against Coriolus Versicolor in case of Treated with CCA (Tanalith c) [Volume 25, Issue 2, 2018, Pages 260-274]
L
Lari, Jalil
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
Lashgari, Amir
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Lashgari, Amir
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Lashgari, Amir
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Lashgari, Amir
The effect of new product layout on customer satisfaction in wooden household furniture industries using structural equations model in Tehran province [Volume 31, Summer 2, 2016, Pages 294-308]
Lashgari, Amir
The impact of truss structure on stiffness by finite element method [Volume 32, Issue 1, 2017, Pages 69-82]
Lashgari, Amir
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Lashgari, Amir
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021, Pages 340-355]
Lashgari, Amir
Identifying and prioritizing the components of sustainable production in the corrugated box making industry [Volume 38, Issue 1, 2023, Pages 21-36]
Layeghi, Mahammad
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Layeghi, mohammad
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014, Pages 484-492]
Layeghi, mohammad
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Layeghi, Mohammad
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Layeghi, Mohammad
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Layeghi, Mohammad
Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading [Volume 31, SPRING 1, 2016, Pages 118-129]
Layeghi, Mohammad
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016, Pages 472-485]
Layeghi, Mohammad
Creep rupture behavior of a bagasse fiber-polypropylene composite [Volume 31, Issue 4, 2017, Pages 671-683]
Layeghi, Mohammad
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Layeghi, Mohammad
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Lotfi, Sana
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021, Pages 144-156]
M
Maashi sani, Fatemeh
Investigating the effect of functionalized carbon nanotubes on physical and mechanical properties of wood-plastic nanocomposite [Volume 38, Issue 1, 2023, Pages 59-74]
Madanipour, Mostafa
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Madhoshi, Mehrab
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013, Pages 301-312]
Madhoshi, Mehrab
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Madhoshi, Mehrabi
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017, Pages 486-497]
Madhoushi, Mehrab
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014, Pages 287-298]
Madhoushi, Mehrab
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018, Pages 112-121]
Madhoushi, Mehrab
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019, Pages 242-254]
Madhoushi, Mehrab
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021, Pages 305-316]
Madhoushi, Mehrab
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Madhoushi, Mehrab
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022, Pages 217-228]
Mahdavi, Saeed
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015, Pages 320-329]
Mahdavi, Saeed
Investigation on mechanical properties of HDPE recycled composite filled by furfural residue produced from bagasse [Volume 30, Fall 3, 2015, Pages 376-387]
Mahdavi, Saeed
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015, Pages 662-673]
Mahdavi, Saeed
Evaluation of thermal energy and activated carbon production from bagasse pith [Volume 31, Summer 2, 2016, Pages 181-193]
Mahdavi, Saeed
The effect of TCF bleaching before and after refining on the CMP pulp properties [Volume 31, Fall 3, 2016, Pages 510-521]
Mahdavi, Saeed
The effect of moisture content and storage time of Bagasse on particleboard physical and mechanical properties [Volume 32, Issue 4, 2017, Pages 541-552]
Mahdavi, Saeed
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018, Pages 38-49]
Mahdavi, Saeed
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012, Pages 326-337]
Mahdavi, Saeed
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012, Pages 51-68]
Mahdavi, Saeed
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Mahdavi, Saeed
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011, Pages 58-71]
Mahdavi, Saeed
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2012, Pages 605-621]
Mahdavi, Saeed
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 69-79]
Mahdavi, Saeed
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009, Pages 183-193]
Mahdavi, Saeed
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008, Pages 20-39]
Mahdavi, Saeed
Replacing imported long fiber pulp with kenaf bast fiber soda pulp to improve quality of paper made from bagasse soda pulp [Volume 23, Issue 2, 2008, Pages 157-168]
Mahdavi, Saeed
The effect of press time and resin content on properties of MDF produced
from Rice straw [Volume 22, Issue 1, 2007, Pages 51-61]
Mahdavi, Saeed
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2008, Pages 99-108]
Mahdavi, Saeed
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1987, Pages 152-188]
Mahdavi, Saeed
THE COMPARISON OF FIBER BIOMETRY AND CHEMICAL COMPONENTS OF PHRAGMITES AUSTRALIS FOR PAPERMAKING [Volume 14, 14-No. 272, 2002, Pages 73-109]
Mahdavi, Saeed
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2003, Pages 29-55]
Mahdavi, Saeed
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003, Pages 77-88]
Mahdavi, Saeed
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003, Pages 109-133]
Mahdavi, Saeed
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004, Pages 69-98]
Mahdavi, Saeed
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004, Pages 225-242]
Mahdavi, Saeed
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004, Pages 243-254]
Mahdavi, Saeed
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005, Pages 1-22]
Mahdavi, Saeed
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006, Pages 43-51]
Mahdavi, Saeed
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006, Pages 105-114]
Mahdavi, Saeed
Comparison of thermal energy production from wood biomass [Volume 34, Issue 3, 2019, Pages 313-325]
Mahdavi, Saeed
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020, Pages 1-10]
Mahdavi, Saeed
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Mahdavi, Saeed
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Mahdavi, Saeed
Replacement of elemental chlorine-free (ECF) with the traditional method for bagasse soda pulp bleaching [Volume 35, Issue 3, 2020, Pages 259-270]
Mahdavi, Saeed
The effect of harvesing time on kenaf biomass and quality of carton top liner [Volume 36, Issue 1, 2021, Pages 40-52]
Mahdavi, Saeed
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022, Pages 204-216]
Mahdavi, Saeed
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023, Pages 141-154]
Mahdavi, Saeed
The effect of some additives to improve water absorption and strengths of paper prepared from old corrugated container [Volume 38, Issue 4, 2023, Pages 251-265]
Mahdavi, Saeid
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Mahdavi, Saeid
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Mahdavi, Saeid
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Mahdavi, Saeid
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2014, Pages 642-653]
Mahdavi, Saeid
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014, Pages 34-43]
Mahdavi, Saeid
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015, Pages 606-617]
Mahdavi, Saeid
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017, Pages 25-32]
Mahdavi, Saeid
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2012, Pages 622-633]
Mahdavi, Saeid
The effects of steaming time, press time and resin content on MDF properties [Volume 25, Issue 1, 2010, Pages 11-21]
Mahdavi, Saeid
Investigation on pulping potential of Iranian rice straw in the paper industries [Volume 6, 6- No. 183, 1998, Pages 1-77]
Mahdavi, Saeid
Investigation on organosolv pulping of wheat straw [Volume 6, 6- No. 183, 1998, Pages 78-160]
Mahjob, Hossein
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006, Pages 1-8]
Maili, Nader
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Majdabadifarahani, Parastoo
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019, Pages 89-99]
Maleki, Ali
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016, Pages 388-397]
Maleki, Sadegh
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Malekian, Behrooz
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020, Pages 283-293]
Maleki Gholandoz, Mostafa
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Malkian, Hamid
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2012, Pages 647-666]
Malmir cheghini, Khodadad
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011, Pages 39-57]
Malmir chegini, Khodadad
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009, Pages 325-340]
Mamizadeh, Yaghob
The effect of using cellulosic Nanofiber and imported chemical pulp and paper on durable paper made of below comb fibers [Volume 33, Issue 3, 2018, Pages 337-346]
Manouchehri, Negin
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Mansori, Hamid reza
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015, Pages 119-131]
Mansoryar, Eiraj
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2018, Pages 211-222]
Mansouri, Hamidreza
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Mansouri, Hamid Reza
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016, Pages 40-47]
Manzor alajdad, Sayed mehdi
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007, Pages 1-17]
Manzorolajdad, Sayed mehdi
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009, Pages 264-274]
Mardani, Bahram
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021, Pages 194-204]
Marzban moridani, Elham
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014, Pages 230-241]
Marzban Moridani, Elham
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
MARZBAN MORIDANI, ELHAM
A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites [Volume 29, Fall 3, 2014, Pages 443-451]
Mashkour, Mahdi
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022, Pages 17-27]
Mashkour, Mozhdeh
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013, Pages 405-416]
Masoudifar, Masieh
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Masoudifar, Masih
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Masoudifar, Masih
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020, Pages 283-293]
Mastari farahani, Mohammad reza
An investigation on paintability of heat treated wood [Volume 30, WINTER 4, 2015, Pages 717-727]
Mastari frahani, Mohammad reza
Effect of Paulownia wood particles addition and press time on particleboard
surface quality [Volume 28, Issue 4, 2014, Pages 672-684]
Mastari frahani, Mohammad reza
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012, Pages 707-716]
Mastari frahani, Mohammad reza
Decay resistance of propionylated Iranian beech wood against white rot
fungus (Trametes versicolor) [Volume 27, Issue 2, 2012, Pages 319-325]
Masteri Farahani, Mohammadreza
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018, Pages 112-121]
Masteri Farahani, Mohammad reza
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Mastouri, Akbar
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023, Pages 281-295]
MastriFarahani, Mohammad reza
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014, Pages 287-298]
Matini behzad, Hamed
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013, Pages 123-133]
Mazela, Bartłomiej
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023, Pages 330-340]
Mazhari mosavi, Said mohammad
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 69-79]
Mehdikhah, Seyyed Abbas
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017, Pages 83-93]
Mehrabi, Saeid
The use of X-ray method to study annual growth variation
of Pinus eldarica [Volume 28, Summer 2, 2013, Pages 341-353]
Mehrabi, Saeid
INVESTIGATION OF PULP PAPER CHARACTERISTIC OF THREE POPLAR COLONS, P.NIGRA, 69/55, 144/9 DELTOIDS, ORAMERICAN 214 [Volume 20, No., 2, 2006, Pages 151-168]
Mehrandish, Mohammad mahdi
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2020, Pages 547-562]
Mehranfar, Amir Hossein
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020, Pages 102-112]
Mehri, Elahe
Fiber dimensions and chemical properties of bamboo phyllostachys pubescens [Volume 29, Summer 2, 2014, Pages 335-345]
Mehri Charvadeh, Meisam
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Mehri Iraie, Hamid reza
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Minaei, Mansor
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012, Pages 635-645]
Minaei, Mansor
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Mir, Samaneh
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2015, Pages 626-635]
MirHoseini Taba, Mjtaba
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Miri Tari, Seyed Mahmoud
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019, Pages 39-49]
Mirshkraee, Ahmad
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
Mirshokraee, Ahmad
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013, Pages 476-488]
Mirshokraee, Ahmad
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Mirshokraei, Ahmad
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Mirshokraei, Ahmad
Investigating the Effect of Structural Changes of Alkali Lignins Caused by Reduction and Methylation Reaction on the Optical Characteristics of Lignin-Containing Papers [Volume 26, Issue 1, 2011, Pages 10-25]
Mirshokraei, Ahmad
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2018, Pages 211-222]
Mirshokraei, Ahmad
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2018, Pages 275-290]
Mirshokraei, Ahmad
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2008, Pages 73-80]
Mirshokraei, Sayed ahmad
Chemical structure elucidation of milled wood lignin and cellulytic lignin from Poplar [Volume 23, Issue 2, 2008, Pages 102-122]
Mirshokraei, Seiad Ahmad
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2015, Pages 609-622]
Mirshokraie, Seeyed Ahmad
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2015, Pages 538-549]
Mirshokraie, Seeyed Ahmad
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012, Pages 556-568]
Mirshokraie, Seeyed Ahmad
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010, Pages 70-79]
Mirshokraie, Seeyed Ahmad
Investigation on possibility of making durable paper with imported Eucalyptus pulp [Volume 24, Issue 1, 2009, Pages 44-57]
Mirshokraie, Seeyed Ahmad
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007, Pages 29-40]
Mirshokraie, Seeyed Ahmad
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004, Pages 137-158]
Mirshokraie, Seeyed Ahmad
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
Mirshokraie, Seeyed Ahmad
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021, Pages 293-304]
Mirza bighi azghandi, Reza
Investigation Produce of Particleboard with use of Bagasse and Haloxylon sp. in [Volume 24, Issue 1, 2009, Pages 99-116]
Mirzaei, Babak
Investigation on the stress relaxation behavior of milled
newsprint filled polyethylene composite [Volume 27, Issue 2, 2012, Pages 226-234]
Mirzaei, Babak
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012, Pages 81-88]
Mirzaei, Babak
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Mirzaei, Babak
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Mirzapour babajan, akbar
Investigating the Impact of Monetary Policy on Value Added Growth in Iran's Industrial Sub-Sectors (Positive Mathematical Programming Approach) with Emphasis on Wood industry sub-sector [Volume 34, Issue 4, 2020, Pages 520-534]
Moazemi, Vahid
The effect of core layer treatment and almond shell powder content in the glue line on the pull off adhesion sandwich panel [Volume 31, SPRING 1, 2016, Pages 141-153]
Modirahmati, Sina
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Modirrahmati, Sina
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012, Pages 635-645]
Modirzarea, Mehdi
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Moeinaddini, Mazaher
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Moezipoor, Bita
Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing [Volume 26, Issue 2, 2011, Pages 271-280]
Moezi poor, Bita
Utilization of date palm and kenaf fibers for reinforcement of
practical properties of plywood [Volume 26, Issue 3, 2011, Pages 495-510]
Moezzipour, Bita
The effect of recycling process on the chemical properties and wettability of obtained fibers from MDF wastes [Volume 32, Issue 4, 2017, Pages 553-564]
Mohamadi Nematabad, Sina
Identifying and prioritizing the components of sustainable production in the corrugated box making industry [Volume 38, Issue 1, 2023, Pages 21-36]
Mohamadkazemi, Faranak
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018, Pages 347-358]
Mohammad ali bighi, Samira
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Mohammadi, Alireza
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011, Pages 128-137]
Mohammadi, Alireza
Effect of static densification of treated paulownia wood on relationship between strength and density [Volume 26, Issue 3, 2011, Pages 592-604]
Mohammadi, Alireza
Making wheat straw particleboards by using mixture of MF and UF resins [Volume 25, Issue 2, 2018, Pages 291-301]
Mohammadi, Iraj
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015, Pages 419-429]
Mohammadi, Mohsen
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021, Pages 317-328]
Mohammadi, Mohsen
The effect of starch sizing on the aesthetic and mechanical properties of historical papers [Volume 36, Issue 4, 2021, Pages 394-403]
Mohammadi, Seid Ali
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012, Pages 676-689]
Mohammadi achachlouei, Mohsen
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017, Pages 131-144]
Mohammadi Achachlouei, Mohsen
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019, Pages 276-289]
Mohammadi Achachluei, Mohsen
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022, Pages 73-85]
Mohammadi achachlui, Mohsen
Modification of yellowing caused by oxidation of paper cellulose using Sodium borohydride and Sodium dithionite [Volume 38, Issue 4, 2023, Pages 296-315]
Mohammadi achzchluei, Mohsen
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017, Pages 261-274]
Mohammad kazemi, Farank
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011, Pages 300-313]
Mohammad Moradi, Zahra
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016, Pages 248-260]
Mohammad Moradi, Zahra
Identification and Prioritization of factors affecting competitiveness of Classic Furniture by using ANP (Case study: Tehran Province) [Volume 33, Issue 2, 2018, Pages 179-195]
Mohebalian, Abdolrahim
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Mohebby, Behbod
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015, Pages 173-181]
Mohebi, Behbood
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Mohebi, Behbood
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007, Pages 18-28]
Mohebi, Behbood
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2008, Pages 99-108]
Mohebi, Nemat
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Mohebi, Roholah
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Mohebi gargari, Rahim
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015, Pages 119-131]
Mohebi gargari, Rahim
The effect of core layer treatment and almond shell powder content in the glue line on the pull off adhesion sandwich panel [Volume 31, SPRING 1, 2016, Pages 141-153]
Mohsseni tavakoli, Sabrineh
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009, Pages 183-193]
Mojerian Galogahi, Vajihe
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018, Pages 112-121]
Molaei, Mohammad
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010, Pages 80-90]
Mollaei, Masoumeh
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2021, Pages 376-391]
Mollahassani, Amir
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Mollahassani, Amir
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020, Pages 33-45]
Moradian, Mohammad Hadi
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021, Pages 144-156]
Moradian Gilan, Kajal
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Moradpour, Neda
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012, Pages 707-716]
Moradpour, Payam
Adhesive Modification and Improvement of Properties of Polyvinyl Acetate Using Nano silica [Volume 38, Issue 2, 2023, Pages 128-140]
Moradyan Gilan, kezhal
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Morshedian, Jalil
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2015, Pages 581-593]
Mosavi, Sayed yahya
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Mosavi, Sayed Yahya
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011, Pages 314-325]
Mosavi, seid najeh
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers [Volume 31, Issue 4, 2017, Pages 662-670]
Mosavian, Said amir
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Mosavi Majd, Azita
Evaluation of Performance of Enzruth Gum Extract in Removal of Stains Caused by Hand Contact from Historical Papers [Volume 35, Issue 2, 2020, Pages 152-164]
Mostafazadeh mrznaki, Morteza
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009, Pages 194-205]
Motie, Nazanin
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018, Pages 300-310]
Mousavi, Mir Reza
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Mousavi-Sangdehi, Atiye Sadat
The effect of treatment duration with Trichoderma harzianum fungus on the biopreservation efficacy of beech wood against white rot [Volume 38, Issue 3, 2023, Pages 181-204]
Mstaghni, Fatemeh
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014, Pages 343-353]
N
Naijian, Fatemeh
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Najafi, abdolah
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite [Volume 31, Fall 3, 2016, Pages 425-434]
Najafi, Abdolah
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2008, Pages 109-120]
Najafi, Abdolah
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021, Pages 78-89]
Najafi, Abdollah
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015, Pages 443-456]
Najafi, Abdollah
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021, Pages 368-381]
Najafian ashrafi, Mohammad
Studying physical and mechanical properties of two Iranian walnut wood from Noor and Shahrkord regions [Volume 38, Issue 3, 2023, Pages 215-224]
Narooei, saeed
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2019, Pages 564-578]
Nasiri, Milad
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Nasiri, Seid Atefeh
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Nasiri, Seyed atefe
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022, Pages 193-203]
Nasiriani, Saeideh
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015, Pages 278-288]
Nasiry, Hamed
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011, Pages 291-299]
Navi, Parviz
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017, Pages 1-12]
Nazaneghad, Noradin
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers [Volume 31, Issue 4, 2017, Pages 662-670]
Nazari, Latif
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017, Pages 422-435]
Nazari, Salehe
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013, Pages 522-533]
Nazari, Sedighe
Effect of heat treatment and boric acid impregnation on the properties and fire resistance of poplar and radiata pine wood [Volume 38, Issue 1, 2023, Pages 75-86]
Nazarneghad, Noradin
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2017, Pages 695-702]
Nazarneghad, Noraldin
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Nazarnezhad, Noradin
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Nazarnezhad, Noraldin
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013, Pages 522-533]
Nazarnezhad, Noraldin
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015, Pages 513-524]
Nazarnezhad, Noraldin
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers [Volume 33, Issue 2, 2018, Pages 196-204]
Nazarnezhad, Noraldin
Study of particleboard manufacture by nonconventional bonding [Volume 26, Issue 1, 2011, Pages 1-9]
Nazarnezhad, Noraldin
Delignification of CMP pulp with Terametes versicolor [Volume 24, Issue 2, 2009, Pages 307-314]
Nazarnezhad, Noraldin
The effect of chitosan coating on the strength and barrier properties of liner paper [Volume 38, Issue 1, 2023, Pages 37-47]
Nazarnezhad, Noredin
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023, Pages 225-236]
Nazarnezhad, noureddin
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019, Pages 27-38]
Nazarnezhad, Noureddin
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024, Pages 1-11]
Nazarnezhad, Noureddin
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Nazarnezhad, nouredin
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2019, Pages 489-500]
Nazaryan, Morteza
Determination of proper college student chair dimension and comparison with the prevalent model [Volume 26, Issue 4, 2012, Pages 772-784]
Nazerani hoshmand, Hossein
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Nazeri, Amir mohsen
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007, Pages 29-40]
Nazeri, Amir mohssen
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013, Pages 1-10]
Nazeri, Amir mohssen
Investigation on the Effects of humidity and heat of combined papers on quality of CorrugatedBoard [Volume 25, Issue 2, 2018, Pages 309-320]
Nazeri, Amir Mohssen
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Nazerian, Morteza
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2015, Pages 626-635]
Nazerian, Morteza
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019, Pages 263-275]
Nazeryan, Morteza
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014, Pages 452-463]
Nazeryan, Morteza
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015, Pages 230-242]
Nazeryan, Morteza
The effect of core layer treatment and almond shell powder content in the glue line on the pull off adhesion sandwich panel [Volume 31, SPRING 1, 2016, Pages 141-153]
Nazeryan, Morteza
Analysis of Papers Physical Properties Made from Mixing LbL-treated and Refined Pulp by Response Surface Method [Volume 31, Fall 3, 2016, Pages 398-409]
Nazeryan, Morteza
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004, Pages 1-24]
Nazrneghad, Noraldin
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Nazry, Amir mohsen
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2012, Pages 605-621]
Neghad, Noraldin
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012, Pages 409-422]
Nemati Babaylou, Ali
Evaluation of Performance of Enzruth Gum Extract in Removal of Stains Caused by Hand Contact from Historical Papers [Volume 35, Issue 2, 2020, Pages 152-164]
Neyciyani, Behrouz
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Nicsresht sigharodi, Mohammad reza
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Nikbin, Negin
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Nikkar, Mohammad
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2017, Pages 569-580]
Nikkhah Dafchahi, Mostafa
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015, Pages 162-172]
Nikkhah Dafchahi, Mostafa
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017, Pages 585-595]
Nikkhah Dafchahi, Mostafa
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018, Pages 290-299]
Nikkhah Dafchahi, Mostafa
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Nikkhah Shahmirzadi, Azadeh
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015, Pages 490-503]
Niromand, Farshid
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Noori, Arezo
Analysis of photodegraded lignin from hardwood
bleached chemimechanical pulp by 13C-NMR [Volume 24, Issue 2, 2009, Pages 254-263]
Noori, Habib
Tensile and compressive load-bearing capacity of combined stresses investigated in connection with built-lingual Corner 45 ° Mobile [Volume 30, Summer 2, 2015, Pages 308-319]
Noori chaparprdy, Hamid
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008, Pages 12-19]
Norbakhsh, Amir
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016, Pages 154-165]
Nori, Habib
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012, Pages 619-634]
Nori, Habib
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009, Pages 219-231]
Nori, Habib
INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING [Volume 20, No., 2, 2006, Pages 169-184]
Nosrati, babak
Anatomical, physical and chemical properties of Sepestan wood (Cordia myxa L.) in Iranshahr region [Volume 30, SPRING 1, 2015, Pages 110-118]
Nosrati, babak
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016, Pages 40-47]
Nosrati, Babak
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015, Pages 119-131]
Nosrati, Babak
Comparative on the Microscopic Properties of wood near the pith to bark in Dalbergia sissoo in ShoshDanial [Volume 30, Fall 3, 2015, Pages 351-361]
Nosrati, Babak
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023, Pages 87-99]
Nosrati sheshkal, Babak
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015, Pages 230-242]
Nourbakgsh, Amir
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013, Pages 435-450]
Nourbakhsh, Amir
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Nourbakhsh, Amir
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013, Pages 381-391]
Nourbakhsh, Amir
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014, Pages 23-33]
Nourbakhsh, Amir
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014, Pages 94-105]
Nourbakhsh, Amir
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015, Pages 85-96]
Nourbakhsh, Amir
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015, Pages 220-229]
Nourbakhsh, Amir
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015, Pages 362-375]
Nourbakhsh, Amir
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015, Pages 434-446]
Nourbakhsh, Amir
The Investigation of Press Temperature and Time on Properties of Medium Density Fiberboard Produced From Cotton Stalks Fibers [Volume 31, Summer 2, 2016, Pages 194-203]
Nourbakhsh, Amir
The Effect of Utilizing ZnO Nanoparticles and Eggshell on Physical and Mechanical Properties of Wood -Plastic Composite Production [Volume 31, Summer 2, 2016, Pages 323-335]
Nourbakhsh, Amir
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016, Pages 486-499]
Nourbakhsh, Amir
The Effect of Nano-Wollastonite on Physical and Mechanical Properties of Wood Plastic Composites Made With Sunflower Stem Waste and Alder [Volume 31, Issue 4, 2017, Pages 684-694]
Nourbakhsh, Amir
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Nourbakhsh, Amir
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017, Pages 450-461]
Nourbakhsh, Amir
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017, Pages 334-344]
Nourbakhsh, Amir
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Nourbakhsh, Amir
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Nourbakhsh, Amir
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012, Pages 202-211]
Nourbakhsh, Amir
Comparing four lignocellulosic materials in the properties of
wood plastics/ nanoclay composites [Volume 27, Issue 2, 2012, Pages 235-255]
Nourbakhsh, Amir
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Nourbakhsh, Amir
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Nourbakhsh, Amir
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Nourbakhsh, Amir
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Nourbakhsh, Amir
Investigation on Physical and Mechanical Properties of Medium Density Fiberboard Produced From Eucalyptus camaldulensis Fibers [Volume 25, Issue 1, 2010, Pages 1-10]
Nourbakhsh, Amir
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011, Pages 26-38]
Nourbakhsh, Amir
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2018, Pages 170-186]
Nourbakhsh, Amir
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2018, Pages 187-200]
Nourbakhsh, Amir
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2018, Pages 201-210]
Nourbakhsh, Amir
Investigation of physical and mechanical properties of paulownia wood in particleboard Industry [Volume 24, Issue 1, 2009, Pages 15-25]
Nourbakhsh, Amir
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009, Pages 26-35]
Nourbakhsh, Amir
Investigation on the utilization of pomegranate wood for particleboard production [Volume 24, Issue 1, 2009, Pages 158-166]
Nourbakhsh, Amir
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009, Pages 167-182]
Nourbakhsh, Amir
Increasing the flexural strength capacity of cement composite
with natural fibres [Volume 24, Issue 2, 2009, Pages 206-218]
Nourbakhsh, Amir
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008, Pages 1-11]
Nourbakhsh, Amir
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008, Pages 91-101]
Nourbakhsh, Amir
Possibility of manufacturing particleboard with Acacia salicina [Volume 23, Issue 2, 2008, Pages 169-177]
Nourbakhsh, Amir
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1996, Pages 50-110]
Nourbakhsh, Amir
Acidity and buffering capacity of Iranian Woods [Volume 2, 2- No 166, 1987, Pages 116-151]
Nourbakhsh, Amir
Investigation on acoustical properties of wood [Volume 3, 3- No. 174, 1997, Pages 1-131]
Nourbakhsh, Amir
Investigating on the effect of wood pH on particleboard properties [Volume 4, 4- No. 181, 1998, Pages 51-155]
Nourbakhsh, Amir
Investigation on potential long fibre Pinus eldarica Kraft Pulp [Volume 5, 5-No. 182, 1998, Pages 1-64]
Nourbakhsh, Amir
Investigating on the possibility of making particleboard from lignocellulosic sources on southern of Iran (Potential for using wood tamarix in particleboard industries). [Volume 7, 7-No. 199, 1998, Pages 1-45]
Nourbakhsh, Amir
Investigation on the utilization of papolar clones grown on Short - rotation age (three years) for particleboard production [Volume 7, 7-No. 199, 1998, Pages 46-89]
Nourbakhsh, Amir
Comparative study on Pulping characteristics of Carpinus betulus and Parotia oersica woods [Volume 9, 9-No. 225, 2000, Pages 1-33]
Nourbakhsh, Amir
INVESTIGATION ON THE POTENTIAL OF EUCALYPTUS CAMALDULENSIS WOOD IN PARTICLEBOARD INDUSTRY [Volume 9, 9-No. 225, 2000, Pages 35-109]
Nourbakhsh, Amir
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2001, Pages 1-60]
Nourbakhsh, Amir
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [Volume 12, 12-No. 251, 2001, Pages 1-38]
Nourbakhsh, Amir
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 14, 14-No. 272, 2002, Pages 1-26]
Nourbakhsh, Amir
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2002, Pages 27-47]
Nourbakhsh, Amir
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2002, Pages 49-72]
Nourbakhsh, Amir
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 15, 15-No. 278, 2002, Pages 33-60]
Nourbakhsh, Amir
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2002, Pages 61-87]
Nourbakhsh, Amir
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2018, Pages 27-56]
Nourbakhsh, Amir
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003, Pages 39-62]
Nourbakhsh, Amir
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004, Pages 1-24]
Nourbakhsh, Amir
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004, Pages 49-68]
Nourbakhsh, Amir
UTILIZATION OF GRAPE PRUNINGS RESIDUES IN PRODUCTION OF PARTICLEBOARD [Volume 19, No., 2, 2004, Pages 159-174]
Nourbakhsh, Amir
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN [Volume 19, No., 2, 2004, Pages 175-192]
Nourbakhsh, Amir
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004, Pages 211-224]
Nourbakhsh, Amir
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM WOOD (CARPINUS BETULUS L.) GROWN AT DIFFERENT ELEVATION OF GOLESTAN FORESTS, IRAN [Volume 19, No., 2, 2004, Pages 259-287]
Nourbakhsh, Amir
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005, Pages 47-64]
Nourbakhsh, Amir
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005, Pages 95-110]
Nourbakhsh, Amir
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005, Pages 111-132]
Nourbakhsh, Amir
INVESTIGATION ON UTILIZATION OF COTTON STALK IN PARTICLEBOARD PRODUCTION [Volume 21, No., 2, 2006, Pages 95-104]
Nourbakhsh, Amir
THE EFFECTS OF DENSITY AND PRESS TIME ON POPLAR INSULATION PARTICLEBOARD PROPERTIES [Volume 21, No., 2, 2006, Pages 115-122]
Nourbakhsh, Amir
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2021, Pages 392-406]
Nourbakhsh, Amir
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021, Pages 182-193]
Oladi, Reza
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Oladi, Reza
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015, Pages 278-288]
Oladi, Reza
The modifying effect of different Bacillus subtilis strains on permeability of pine (Pinus taeda) in two different culture media [Volume 31, Summer 2, 2016, Pages 309-322]
Oladi, Reza
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018, Pages 417-427]
Oladi, Reza
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020, Pages 88-101]
Oladi, Reza
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021, Pages 26-39]
Oladi, Reza
The effect of treatment duration with Trichoderma harzianum fungus on the biopreservation efficacy of beech wood against white rot [Volume 38, Issue 3, 2023, Pages 181-204]
Omidbakhsh Amiri, Elham
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017, Pages 565-575]
Omidvar, Asghar
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008, Pages 178-190]
Omrani, Pantea
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020, Pages 294-305]
OMRANI, PANTEA
Investigation and compare the tensile strength of hardwood dowel joints, made by glue and welding [Volume 32, Issue 3, 2017, Pages 382-391]
OMRANI, PANTEA
Investigating the effect of diameter and dowel surface in softwood joints, made by welding and glue [Volume 32, Issue 4, 2017, Pages 598-605]
OMRANI, PANTEA
Investigation affect of fiber reinforced polymer (FRP) on stress carrying capacity of miter corner joint under diagonal tension loading [Volume 35, Issue 4, 2021, Pages 307-320]
Oromiehie, Abdolrasool
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Oromihei, Abdol rasol
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Ostadi, Elham
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2015, Pages 581-593]
Otarod, Mona
Morphological characteristics and chemical components of sunflower stalk (Helianthus annus. Var. cheernianka 66) cultivated in Astara [Volume 34, Issue 3, 2019, Pages 372-386]
P
Pangh, Halimeh
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014, Pages 368-375]
Parhizkari, Mohammad mehdi
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011, Pages 477-485]
Parsa paghoh, Davood
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012, Pages 434-444]
Parsapazhoh, Davood
EFFECTS OF ENVIRONMENTAL FACTORS ON FORMATION OF LIGNIN IN EUCALYPTUS CAMALDULENSIS DEHN. GROWN IN KHOSESTAN-IRAN [Volume 18, No. 1, 2003, Pages 1-38]
Parsapazhoh, Davood
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003, Pages 89-108]
Parsa pazhoh, Davood
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1987, Pages 1-115]
Partovinia, Ali
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Payan, Mohammad Hasan
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015, Pages 132-143]
Payan, Mohammad hassan
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014, Pages 434-442]
Pesaraklu, Ali
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Pesarklo, Mohammad reza
Effect of Paulownia wood particles addition and press time on particleboard
surface quality [Volume 28, Issue 4, 2014, Pages 672-684]
Pezeshki, Vahid
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020, Pages 219-231]
Pirayesh, Hamid reza
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017, Pages 509-517]
Pirayeshfar, Amir sohil
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Pirayesh far, Amir sohil
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011, Pages 314-325]
Pirmoradian, Kamal
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Pishan, Sakineh
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2014, Pages 720-731]
Pizzi, Antonio
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022, Pages 251-260]
Podinehpoor, Mohammad ali
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006, Pages 61-69]
Podinehpoor, Mohammad ali
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006, Pages 70-77]
Podineh poor, Mohammad ali
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2006, Pages 271-284]
Poladi, Milad
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Poozesh, Mostafa
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016, Pages 40-47]
Porbar, Samira
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017, Pages 181-192]
Pormosa, Shademan
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011, Pages 39-57]
Pourhooshyar Ziabari, Kamrava
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Pourkarami, Samaneh
Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor) [Volume 31, SPRING 1, 2016, Pages 14-29]
Pourmosa, shadman
Wood anatomy of an Iranian mangrove plant Avicennia marina (Forsk) Vierth [Volume 29, WINTER 4, 2015, Pages 561-571]
Pourmosa, Shadman
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Pourmosa, Shadman
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Pourmousa, Shademan
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015, Pages 475-490]
Pourmousa, Shademan
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017, Pages 83-93]
Pourmousa, Shademan
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019, Pages 167-179]
Pourmousa, Shademan
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Pourmousa, Shademan
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Pourmousa, Shademan
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023, Pages 1-20]
Pourmousa, Shademan
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Pourmousa, Shademan
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024, Pages 71-82]
Pourmousa, Shademan
Identifying and prioritizing the components of sustainable production in the corrugated box making industry [Volume 38, Issue 1, 2023, Pages 21-36]
Pourmousa, Shadman
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Pourmousa, Shadman
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013, Pages 489-497]
Pourmousa, Shadman
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021, Pages 340-355]
Pourtahmasi, Kambiz
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017, Pages 171-180]
Pourtahmasi, Kambiz
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Pourtahmasi, Kambiz
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008, Pages 40-49]
Pourtahmasi, Kambiz
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019, Pages 349-360]
Pourtahmasi, Kambiz
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021, Pages 26-39]
Pyramon, Mohammad reza
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016, Pages 472-485]
R
Radkyan, Mazyar
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005, Pages 111-132]
Raeisi, Marzyeh
Investigation of physical and mechanical properties of particleboard
made from Apricot pruning and industrial wood particles [Volume 24, Issue 2, 2009, Pages 244-253]
Raeisi, Marzyeh
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008, Pages 136-148]
Rafiei, Gholamreza
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2018, Pages 275-290]
Rafieian, Fatemeh
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Rahimi, Atefe
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019, Pages 124-133]
Rahimi, Sohrab
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Rahimi, Sohrab
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Rahimi, Sohrab
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2018, Pages 211-222]
Rahimi dastjerdi, Habib
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2015, Pages 636-647]
Rahmaninia, Mehdi
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017, Pages 227-237]
Rahmaninia, Mehdi
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017, Pages 530-540]
Rahmaninia, Mehdi
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018, Pages 256-269]
Rahmaninia, Mehdi
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020, Pages 76-87]
Rahmaninia, Mehdi
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020, Pages 102-112]
Rahmaninia, Mehdi
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021, Pages 382-393]
Rahmani nia, Mehdi
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Rahymian, Heshmatalah
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2004, Pages 139-154]
Rajabi Cham Heidari, Hosseinali
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017, Pages 436-449]
Rajabi Cham Heidari, Hosseinali
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020, Pages 178-194]
Ramazani, Omid
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Ramazani, Omid
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015, Pages 513-524]
Ramazani, Omid
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007, Pages 1-17]
Ramezani, Narges
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2020, Pages 535-546]
Ramezani, Omid
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Ramezani, Omid
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Ramezani, Omid
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014, Pages 190-198]
Ramezani, Omid
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Ramezani, Omid
Effect of storage and bleaching of cotton fiber pulp on the stability of Bond paper optical properties [Volume 34, Issue 2, 2019, Pages 217-227]
Ramezani, Omid
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Ramezani, Omid
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Ramezani, Shima
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Ramezanpour-Charvadeh, Mohaddeseh
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Ramtin, Aliakbar
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008, Pages 74-82]
Ramtin, Aliakbar
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006, Pages 70-77]
Ramtin, Ali akbar
Study on Mechanical Properties of Composites Made From Sander Dust of Particleboard-Polypropylene [Volume 24, Issue 1, 2009, Pages 58-68]
Ramtin, Ali akbar
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008, Pages 178-190]
Ramtin, Ali akbar
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006, Pages 61-69]
Rangavar, Hosein
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015, Pages 97-109]
Rangavar, Hossein
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013, Pages 224-237]
Rangavar, Hossein
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Rangavar, Hossein
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2014, Pages 628-641]
Rangavar, Hossein
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014, Pages 434-442]
Rangavar, Hossein
The Effect of Decorative Coatings by mixing of Poly Vinyl Acetate and Urea-
Formaldehyde on Physical and Mechanical Properties Particleboard [Volume 30, Summer 2, 2015, Pages 194-206]
Rangavar, Hossein
Study on the Effect of flour glue additive to reduce the gypsum curing time and improve the physical and mechanical properties of wood gypsumboard made from poplar particles and canola stem wastes [Volume 30, Fall 3, 2015, Pages 388-398]
Rangavar, Hossein
Effect of nano-wollastonite, poly vinyl chloride and heavy polyethylene polymers and board structure on fire resistance of particleboard made of pepper stalk and industrial wood [Volume 30, Fall 3, 2015, Pages 503-512]
Rangavar, Hossein
Investigation on Effect of cement Types on the cement hydration and properties of wood-cement composites manufactured from sunflower stalk(Helianthus Annuus) [Volume 31, Summer 2, 2016, Pages 336-348]
Rangavar, Hossein
The Effect of Nano-Wollastonite on Physical and Mechanical Properties of Wood Plastic Composites Made With Sunflower Stem Waste and Alder [Volume 31, Issue 4, 2017, Pages 684-694]
Rangavar, Hossein
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012, Pages 619-634]
Rangavar, Hossein
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
RANJBAR, BABAK
Study of mental and emotional reactions to decoration color Living and working environment.. [Volume 34, Issue 1, 2019, Pages 134-139]
Raofkia, Komail
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Rashedi, Kambiz
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Rashidi, Alimorad
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019, Pages 242-254]
Rashidi joibari, Iman
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Rashnv, Arash
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Rasoli, Davood
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008, Pages 63-73]
Rasoli garmarodi, Esmaeil
Application of nano silver in the production of antibacterial banknote paper [Volume 31, SPRING 1, 2016, Pages 166-179]
Rasol pour hedayati, Naser
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015, Pages 513-524]
Rasooli, Davood
Feasibility of utilizing polypropylene as a binder for plywood manufacture [Volume 24, Issue 1, 2009, Pages 91-98]
Rasooly, Esmaeel
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018, Pages 231-243]
Rasooly Garmaroody, Esmaeil
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015, Pages 419-429]
Rasooly Garmaroody, Esmaeil
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015, Pages 618-631]
Rasooly Garmaroody, Esmaeil
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017, Pages 518-529]
Rasooly Garmaroody, Esmaeil
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2019, Pages 553-563]
Rasooly Garmaroody, Esmaeil
Effect of storage and bleaching of cotton fiber pulp on the stability of Bond paper optical properties [Volume 34, Issue 2, 2019, Pages 217-227]
Rasooly Garmaroody, Esmaeil
Chemical Modification of the xylan extracted from bagasse pith to prepare antibacterial carboxymethyl xylan/chitosan film [Volume 34, Issue 4, 2020, Pages 448-460]
Rasooly Garmaroody, Esmaeil
Effect of Alkali Oxidation of fiber on characteristic of virgin and recycled pulp [Volume 38, Issue 4, 2023, Pages 316-329]
Rasooly Garmaroudy, Esmaeil
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017, Pages 215-226]
Rasouli, Davood
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020, Pages 22-32]
Rasouli, Davood
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022, Pages 17-27]
Rassam, Ghonche
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014, Pages 266-274]
Rassam, Ghoncheh
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Rassam, Ghoncheh
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015, Pages 97-109]
Rastbod, Esmail
Studying physical and mechanical properties of two Iranian walnut wood from Noor and Shahrkord regions [Volume 38, Issue 3, 2023, Pages 215-224]
Razmpour, Zahra
A feasibility study on identification of stickies and their sources in packaging paper mill [Volume 38, Issue 2, 2023, Pages 114-127]
Razmpour, Zahra
ontrol of micro-stickies originated from recycling of Old Corrugated Containers (OCC) using some selected chemical and physical methods [Volume 38, Issue 2, 2023, Pages 155-169]
Resalati, Hosein
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2019, Pages 579-592]
Resalati, Hosin
The effect of chitosan coating on the strength and barrier properties of liner paper [Volume 38, Issue 1, 2023, Pages 37-47]
Resalati, Hossein
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Resalati, Hossein
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015, Pages 14-25]
Resalati, Hossein
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015, Pages 162-172]
Resalati, Hossein
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Resalati, Hossein
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017, Pages 585-595]
Resalati, Hossein
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Resalati, Hossein
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018, Pages 290-299]
Resalati, Hossein
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Resalati, Hossein
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012, Pages 143-155]
Resalati, Hossein
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011, Pages 193-217]
Resalati, Hossein
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011, Pages 243-255]
Resalati, Hossein
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011, Pages 523-534]
Resalati, Hossein
Investigation on organosolv pulping of wheat straw [Volume 6, 6- No. 183, 1998, Pages 78-160]
Resalati, Hossein
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020, Pages 165-177]
Resalati, Hossein
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020, Pages 205-217]
Resalati, Hossein
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2021, Pages 332-347]
Resalatii, Hossein
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Resalaty, Hossein
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018, Pages 381-390]
Resalti, Hossein
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011, Pages 411-428]
Resalti, Hossein
The effects of hot water pre-extraction and alkaline catalyzed on
soda-AQ pulping of kenaf whole stem [Volume 26, Issue 3, 2011, Pages 437-453]
Resalti, Hossein
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2018, Pages 223-233]
Resalti, Hossein
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 69-79]
Resalti, Hossein
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009, Pages 295-306]
Resalty, Hossein
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014, Pages 254-265]
Rezaei, Fatemeh
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2012, Pages 667-681]
Rezaei, Fatemh
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015, Pages 289-298]
Rezaei niaraki, Porya
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Rezaian, Alireza
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019, Pages 263-275]
Rezaneghad, Ali
Study on Durability of Oak Wood by Field test stakes [Volume 25, Issue 1, 2010, Pages 22-31]
Rezanezhad, Ali
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2001, Pages 39-72]
Rezanezhad, Mojtaba
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021, Pages 14-25]
Rezanezhad, Shaghaygh
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Reza nezhad, Ali
FACTORS CAUSING ATTACK OF WOODEN VESSELS AND MARINE STRUCTURE IN COSTS OF IRAN [Volume 16, 16-No. 293, 2003, Pages 59-72]
Reza nezhad, Ali
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2018, Pages 57-72]
Reza nezhad, Ali
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003, Pages 63-76]
Reza nezhad, Ali
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2004, Pages 205-218]
Reza nezhad, Ali
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004, Pages 97-114]
Reza nezhad, Ali
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004, Pages 115-131]
Reza nezhad, Ali
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN MAHSHAHR (PERSIAN GULF), BANDAR TORKMAN AND NOSHAHR (CASPIAN SEA) COASTS [Volume 19, No., 2, 2004, Pages 193-210]
Reza nezhad, Ali
INVESTIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R.T.BAKER) AGAINST TRAMETES VERSICOLOR L.EX [Volume 20, No., 1, 2005, Pages 133-142]
Reza nezhad, Ali
INVETIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R. T.BAKER) BY FIELD TEST STAKES [Volume 21, No., 1, 2006, Pages 52-60]
Rezanzhad, Ali
Study on Termites Resistance of Oak Wood by Field test stakes [Volume 22, Issue 1, 2007, Pages 62-72]
Rezayati Charani, Pejman
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2019, Pages 593-605]
Rezazadeh, Eysa
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021, Pages 368-381]
Rezazadeh, Iesa
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024, Pages 55-71]
Rezvani, Mohammad Hadi
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017, Pages 33-46]
Rezvani, Mohammad Hadi
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017, Pages 436-449]
Rezvani, Mohammad Hadi
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2020, Pages 547-562]
Rezvani, Mohammad Hadi
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020, Pages 178-194]
Rezvani, Mohammad Hadi
The effect of harvesing time on kenaf biomass and quality of carton top liner [Volume 36, Issue 1, 2021, Pages 40-52]
Rmazani, Omid
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Rodi, Hamidreza
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Rodi, Hamidreza
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Rodi, Hamid reza
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017, Pages 57-68]
Rodi, Hamid reza
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017, Pages 215-226]
Rodi, Hamid reza
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017, Pages 238-250]
Rodi, Hamid reza
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018, Pages 12-24]
Rodi, Hamid reza
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018, Pages 25-37]
Rodi, Hamid reza
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019, Pages 76-88]
Rohnia, Mehran
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013, Pages 238-257]
Rohnia, Mehran
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Rohnia, Mehran
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013, Pages 89-96]
Rohnia, Mehran
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015, Pages 183-193]
Rohnia, Mehran
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017, Pages 287-299]
Rohnia, Mehran
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Rohnya, Mehran
Investigating the effect of canola particles on acoustic properties of
particleboard [Volume 29, Fall 3, 2014, Pages 399-410]
Roohani, Mehdi
Biodegradation and migration behavior of cellulose nanocrystal - nanoclay reinforced PLA composites [Volume 31, SPRING 1, 2016, Pages 130-140]
Roohani, Mehdi
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2020, Pages 475-487]
Roohnia, Mehran
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Roohnia, Mehran
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Roohnia, Mehran
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Roohnia, Mehran
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015, Pages 26-36]
Roohnia, Mehran
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017, Pages 13-24]
Roohnia, Mehran
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017, Pages 47-56]
Roohnia, Mehran
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Roohnia, Mehran
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Roohnia, Mehran
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Roohnia, Mehran
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Roohnia, Mehran
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Roohnia, Mehran
Investigation and prediction on Fluting Paper Supply &Demand in Iran [Volume 23, Issue 2, 2008, Pages 123-135]
Roohnia, Mehran
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2004, Pages 185-204]
Roohnia, Mehran
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019, Pages 89-99]
Roohnia, Mehran
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021, Pages 256-263]
Roohnia, Mehran
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Roohnia, Mehran
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Roohnia, Mehran
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022, Pages 282-292]
Roohnia, Mehran
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Roshanasan, Jalil
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2018, Pages 302-308]
Roshanasan, Jalil
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008, Pages 83-90]
Roshnasan, Jalil
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Rostaei, Maryam
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2012, Pages 622-633]
Rostaei, Maryam
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010, Pages 80-90]
Rostampoor haftkhani, Akbar
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Rouhbakhsh Bidaei, Mahmoud
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018, Pages 280-289]
Rrsalati, Hossein
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2015, Pages 515-525]
Rudi, Hamidreza
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018, Pages 231-243]
Rudi, Hamidreza
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Rudi, Hamidreza
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2020, Pages 535-546]
Rudi, Hamid reza
Analysis of Papers Physical Properties Made from Mixing LbL-treated and Refined Pulp by Response Surface Method [Volume 31, Fall 3, 2016, Pages 398-409]
S
Saadatnia, Mohammadali
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021, Pages 144-156]
Sabor, Mehdi
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Sabzehparvar, Mohammad Reza
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024, Pages 71-82]
Sadadt nezhad, Sayed hamzeh
Effect of longitudinal compression to bulk cell wall on mechanical properties of steamed treated of beach wood [Volume 23, Issue 2, 2008, Pages 191-199]
Sadat nezhad, Sayed hamzeh
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008, Pages 149-156]
Sadatnia, Mohamad ali
Comparison of stiffness parameters of two kinds of date palm using nondestructive test [Volume 33, Issue 1, 2018, Pages 133-141]
Sadat nia, Mahammad ali
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017, Pages 509-517]
Sadat nia, Mohammad ali
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Sadeghi, Aghdas
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2008, Pages 73-80]
Sadeghi, Sayed mosa
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003, Pages 109-133]
Sadeghi, Sayed mosa
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2004, Pages 155-184]
Sadeghifar, Hassan
The effect of TCF bleaching before and after refining on the CMP pulp properties [Volume 31, Fall 3, 2016, Pages 510-521]
Sadeghifar, Hassan
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Sadeghipour ranjbar, Mohammad
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021, Pages 329-339]
Sadeghzadeh Hallaj, MohammadHossein
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021, Pages 26-39]
Sadghyan, Bahman
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2006, Pages 207-236]
Sadraei, Nayeralsadat
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000, Pages 91-147]
Sadraei, Nayeralsadat
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2001, Pages 1-60]
Sadraei, Nayeralsadat
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2001, Pages 61-123]
Sadraei, Nayeralsadat
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Sadraei, Nayeralsadat
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
Sadraei, Nayerolsadat
Effect of spacing on wood properties and yeild of Two Populus Deltoides clones in safrabasteh (Guilan) [Volume 8, 8- No. 217, 2000, Pages 1-30]
Saeedi, Haseibeh
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018, Pages 25-37]
Saeidi, Hasibeh
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017, Pages 57-68]
Safarpour, Arsalan
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Safdari, Vahid
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015, Pages 538-551]
Safdari, Vahid
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Safdari, Vahid
Anatomical, physical and chemical properties of
(Seidlitzia rosmarinus Bunge ex Boiss) wood in irano-torani region [Volume 27, Issue 2, 2012, Pages 112-225]
Safdari, Vahid
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Safdari, Vahid
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Safdari, Vahid
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2018, Pages 248-259]
Safdari, Vahid
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Safdari, vahid reza
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Safdari, Vahidreza
The Investigation of the Utilization Impact of
Alnus subcordata Waste and Poplar Wood in Particle Board Production [Volume 30, SPRING 1, 2015, Pages 37-45]
Safdari, Vahidreza
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Safdari, Vahid reza
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Safdari, Vahid reza
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Safdari, Vahid reza
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Safdari, Vahid reza
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011, Pages 564-578]
Safdari, Vahid reza
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2018, Pages 187-200]
Safdari, Vahid reza
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Safdari, Vahid Reza
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Saffari, Mohsen
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015, Pages 341-349]
Safizadeh, Ali
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018, Pages 311-322]
Sakhavati, Neda
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012, Pages 267-274]
Salarian, Hamidreza
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2017, Pages 569-580]
Salehi, Kamiar
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017, Pages 94-105]
Salehi, Kamyar
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018, Pages 402-416]
Salehi, Kamyar
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Salehi, Kamyar
Comparative Study On Fiber Dimension, Density And Chemical
Components Of Two Varieties Of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 36-44]
Salehi, Kamyar
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009, Pages 183-193]
Salehi, Kamyar
Investigating on the possibility of making particleboard from lignocellulosic sources on southern of Iran (Potential for using wood tamarix in particleboard industries). [Volume 7, 7-No. 199, 1998, Pages 1-45]
Salehi, Kamyar
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000, Pages 1-90]
Salehi, Kamyar
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2001, Pages 73-139]
Salehi, Kamyar
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003, Pages 109-133]
Salehi, Kamyar
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2004, Pages 155-184]
Salehi, Kamyar
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2004, Pages 239-267]
Salehi, Kamyar
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006, Pages 43-51]
Salehi, Kamyar
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019, Pages 302-311]
Salehi, Kamyar
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Salehi, Kamyar
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021, Pages 132-143]
Salehi, Kamyar
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Salehi, Kamyar
Evaluation of engineering characteristics of decayed thermo-wood by brown rot fungus [Volume 37, Issue 4, 2022, Pages 306-317]
Salehi, Kamyar
Influence of thermally modification of ash and spruce on the functionality of fungal destructive agent (Coniophora puteana) [Volume 38, Issue 3, 2023, Pages 170-180]
Salehi, Majid
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Salehi, Mohammad
Studying physical and mechanical properties of two Iranian walnut wood from Noor and Shahrkord regions [Volume 38, Issue 3, 2023, Pages 215-224]
Salehpoor, Shabo
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016, Pages 58-66]
Salehpour, Shoboo
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018, Pages 122-132]
Salimifar, Mohammad reza
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017, Pages 311-321]
Samariha, Ahmad
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013, Pages 1-10]
Samariha, Ahmad
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017, Pages 411-421]
Samariha, Ahmad
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012, Pages 326-337]
Samariha, Ahmad
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Samariha, Ahmad
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011, Pages 429-436]
Samariha, Ahmad
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021, Pages 157-169]
Samariha, Ahmad
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022, Pages 204-216]
Samariha, Ahmad
Investigating the effect of coated cardboard storage in freezer coated with two layers of nano-polyurethane and nano-clay on its physical and mechanical properties [Volume 38, Issue 3, 2023, Pages 205-214]
Samariha, Ahmad
Comparison of separate and combined effect of nanosilica and cationic additives on the optical properties of the white packaging liner [Volume 38, Issue 4, 2023, Pages 266-280]
Samouei, Hussein
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021, Pages 1-13]
Samsami, Hossein
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021, Pages 356-367]
Samzadeh, Alireza
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016, Pages 40-47]
Sanei, Ehsan
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017, Pages 402-410]
Sapideh dam, Sayed javad
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Saraeian, Ahmad reza
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013, Pages 405-416]
Saraeian, Ahmad reza
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Saraeian, Ahmad reza
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2015, Pages 503-514]
Saraeian, Ahmad reza
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Saraeian, Ahmad reza
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011, Pages 117-127]
Saraeian, Ahmad reza
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011, Pages 243-255]
Saraeian, Ahmad Reza
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Saraeian, Ahmad Reza
Investigating the effect of using oxygen delignification process on bagasse soda pulp properties [Volume 31, Summer 2, 2016, Pages 261-279]
Saraeyan, ahmadreza
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015, Pages 1-13]
Saraeyan, Ahmadreza
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Saraeyan, Ahmad reza
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014, Pages 411-421]
Saraeyan, Ahmad reza
Effect of Coating on Paper made from bagasse soda pulp
with Biodegradable Polymer [Volume 31, Summer 2, 2016, Pages 204-210]
Saraeyan, Ahmad reza
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018, Pages 323-336]
Saraeyan, Ahmad reza
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012, Pages 143-155]
Saraeyan, Ahmad reza
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011, Pages 98-116]
Saraeyan, Ahmad reza
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011, Pages 339-351]
Saraeyan, Ahmad reza
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010, Pages 32-47]
Saraeyan, Ahmad reza
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010, Pages 138-146]
Saraeyan, Ahmad reza
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2018, Pages 223-233]
Saraeyan, Ahmad reza
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009, Pages 134-147]
Saraeyan, Ahmad reza
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009, Pages 264-274]
Saraeyan, Ahmad reza
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009, Pages 295-306]
Saraeyan, Ahmad Reza
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019, Pages 100-111]
Saraeyan, Ahmad Reza
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019, Pages 255-262]
Sarkhosh rahmani, Farshad
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011, Pages 387-397]
Sepahvand, Sima
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2019, Pages 531-543]
Sepahvand, ُSima
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013, Pages 266-276]
Sepahvand, ُSima
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012, Pages 655-663]
Sepehr, Amir
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Sepehr, Amir
Investigation on the heat transfer and evolution of temperature gradient through wood during drying; Case study: beech (Fagus orientalis) and spruce (Picea abies) [Volume 25, Issue 2, 2018, Pages 234-247]
Sepehridad, Hossein
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017, Pages 157-170]
Sepidedam, Javad
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2003, Pages 29-55]
Sepidedam, Sayed javad
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Sepidedam, Seiad Javad
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012, Pages 522-535]
Sepide dam, Sead Javad
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Sepidehdam, Javad
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015, Pages 362-375]
Sepidehdam, Sayed javad
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011, Pages 58-71]
Sepidehdam, Sayed javad
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2012, Pages 647-666]
Sepidehdam, Sayed javad
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1987, Pages 152-188]
Sepidehdam, Sayed Javad
Investigation on potential long fibre Pinus eldarica Kraft Pulp [Volume 5, 5-No. 182, 1998, Pages 1-64]
Sepidehdam, Sead Javad
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Sepidehdam, SeaidJavad
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014, Pages 354-367]
Sepidehdam, Seid Javad
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2015, Pages 526-237]
Sepideh dam, Mohammad javad
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Sepideh dam, Saeid Javad
Investigation on Properties of NSSC Pulp from Eucalyptus camaldulensis wood in two habitats of Zagmarz and Fars province [Volume 5, 5-No. 182, 1998, Pages 65-148]
Sepideh dam, Sayed javad
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004, Pages 225-242]
Sepideh dam, Seid Javad
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015, Pages 183-193]
Sepideh dam, Seyad Javad
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Seyedzadeh Otaghsaraei, seyed mojtaba
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016, Pages 486-499]
Seyydi, Seyyed Mehdi
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015, Pages 132-143]
Shabanalizadeh, ّFahimeh
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Shabani, Behzad
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Shabanpour, Saeb
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers [Volume 33, Issue 2, 2018, Pages 196-204]
Shafaee, Mahdis
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2017, Pages 541-556]
Shahbazi, Hossein
Selection and determination of the effective factors on packaging paper
print quality using design of experiments [Volume 29, SPRING 1, 2014, Pages 12-22]
Shahraki, Afsaneh
Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor) [Volume 31, SPRING 1, 2016, Pages 14-29]
Shahverdi, Mahdi
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Shakeri, َAbdolah
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Shakeri, Ahmad reza
Effect of Coating on Paper made from bagasse soda pulp
with Biodegradable Polymer [Volume 31, Summer 2, 2016, Pages 204-210]
Shakeri, Alireza
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014, Pages 208-219]
Shakeri, Alireza
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012, Pages 707-716]
Shakeri, Alireza
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017, Pages 359-368]
Shakeri, Alireza
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019, Pages 100-111]
Shakeri, Alireza
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019, Pages 255-262]
Shakeri, Alireza
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Shakhes, Jalal
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011, Pages 339-351]
Shalbafan, Ali
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008, Pages 12-19]
Shalbafan, Ali
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2006, Pages 285-301]
Shalbafan, Ali
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023, Pages 87-99]
Shamshiri, Mahdi
Studying physical and mechanical properties of two Iranian walnut wood from Noor and Shahrkord regions [Volume 38, Issue 3, 2023, Pages 215-224]
Shamsi, Sayed Saeed
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021, Pages 382-393]
Shamsian, Mohammad
An Intelligent Neural Networks System for Prediction of particleboard properties [Volume 29, Summer 2, 2014, Pages 242-253]
Shamsian, Mohammad
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014, Pages 376-389]
Shamsian, Mohammad
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015, Pages 266-277]
Shamsian, Mohammad
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015, Pages 674-689]
Shamsiyan, Mohamma
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019, Pages 263-275]
Shamsy, Razyeh
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016, Pages 472-485]
Sharari, Meraj
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2018, Pages 275-290]
Sharifi, Saeideh
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012, Pages 143-155]
Sharifi, Saeideh
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2018, Pages 302-308]
Sharifi, Saeideh
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008, Pages 83-90]
Sharifi, Seed Hasan
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Sharifi, Seyed Hassan
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2019, Pages 489-500]
Sharifi, Seyed Hassan
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2019, Pages 579-592]
Sharifi, Seyed Hassan
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019, Pages 12-26]
Sharifi, Seyed Hassan
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019, Pages 27-38]
Sharifi, Seyed Hassan
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Sharifi, Seyed Hassan
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021, Pages 90-104]
Sharifi, Seyed Hassan
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023, Pages 225-236]
Sharifi tasco, Hamed
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015, Pages 705-716]
Shayeghani akmal, Amir abas
The effect of pulp and cellulose nanofiber cyanoethylation on the physical properties of transformer insulating paper [Volume 31, SPRING 1, 2016, Pages 1-13]
Shaygani Akmal, Amirabas
Assessment of accelerated aging for thermally upgraded transformer
insulation paper by dicyandiamide [Volume 31, Fall 3, 2016, Pages 446-457]
Shayghani akmal, Amir abbas
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Shidpour, Reza
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019, Pages 1-11]
Shidpour, Reza
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Shiralizadeh, Farzaneh
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015, Pages 46-59]
Shiyarkar, Iraj
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013, Pages 561-582]
Shob chary, Hossein
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011, Pages 98-116]
Shojaie, Mohammad hamed
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Sinaie, Ahmad
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite [Volume 31, Fall 3, 2016, Pages 425-434]
Sixta, Herbert
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019, Pages 409-423]
Sobhani, Babak
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Sobhani Oskouie, Farvahl
The Effect of Modification with Silan Compound on Physical Properties of Popolus [Volume 31, Fall 3, 2016, Pages 458-471]
Sobhi Nosrat, Asghar
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015, Pages 475-490]
Sodaei, Bita
Investigation of fungal contamination in some manuscript of Malek Museum [Volume 36, Issue 2, 2021, Pages 170-178]
Sodeifi, Bardia
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019, Pages 27-38]
Sodeifi, Bardia
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023, Pages 225-236]
Sokhtesaraei, Alireza
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016, Pages 78-91]
Soleymanisadati, Ali
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018, Pages 12-24]
Solhnejad, Reza
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014, Pages 79-93]
Solimani, Ali
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011, Pages 411-428]
Solimani, Ali
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011, Pages 523-534]
Solimani, Somayeh
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2012, Pages 647-666]
Solimani ashtiani, Homayon
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2002, Pages 49-72]
Soltani, Mogtaba
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021, Pages 368-381]
Solymani, Homayon
Investigation on the utilization of pomegranate wood for particleboard production [Volume 24, Issue 1, 2009, Pages 158-166]
Sotudeh, Arash
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014, Pages 354-367]
Sraeyan, Ahmadreza
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012, Pages 16-26]
Sukhtesaraie, Alireza
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018, Pages 76-87]
Syahipoor, Zoghali
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006, Pages 9-21]
T
Tabarsa, Taghi
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Tabarsa, Taghi
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2014, Pages 742-754]
Tabarsa, Taghi
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012, Pages 655-663]
Tabarsa, Taghi
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012, Pages 338-347]
Tabarsa, Taghi
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011, Pages 128-137]
Tabarsa, Taghi
Effect of static densification of treated paulownia wood on relationship between strength and density [Volume 26, Issue 3, 2011, Pages 592-604]
Tabarsa, Taghi
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008, Pages 136-148]
Tabarsa, Taghi
Investigation on the Effect of UF resin polymerization variable on strength of Uf bonded Hornbeam particleboard [Volume 1, Issue 148, 1996, Pages 1-53]
Tabarsa, Taghi
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004, Pages 211-224]
Tabarsa, Taghi
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Tabarsa, Tagi
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013, Pages 266-276]
Tabarsa, Tagi
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013, Pages 277-289]
Tabeai, Asghar
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Tabei, Asghar
Comparative study of chemical components and morphological features
of trunk and cone fibers from loblolly pine grown in Gilan province [Volume 28, Issue 3, 2013, Pages 545-560]
Tabei, Asghar
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013, Pages 561-582]
Tabei, Asghar
Identify the Chemical Composition of Tobacco Stem Wood Extractives (Nicotiana tabacum L. 'Coker 347')
by Gas Chromatography- Mass Spectrometry [Volume 29, SPRING 1, 2014, Pages 66-57]
Tabei, Asghar
Investigation on Physical and Mechanical Properties of Nanocomposites Made From Flour Of Pistachio Shell/ Corn Starch/ Nanoclay [Volume 29, SPRING 1, 2014, Pages 142-155]
Tabei, Asghar
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014, Pages 79-93]
Tabei, Asghar
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2015, Pages 623-632]
Tabei, Asghar
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015, Pages 525-537]
Tabei, Asghar
Investigating the effect of methylation treatment on the kraft lignin optical behavior through simulation of lignin-containing papers [Volume 31, Fall 3, 2016, Pages 410-424]
Tabei, Asghar
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Tabei, Asghar
Morphological characteristics and chemical components of sunflower stalk (Helianthus annus. Var. cheernianka 66) cultivated in Astara [Volume 34, Issue 3, 2019, Pages 372-386]
Tabei, Asghar
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020, Pages 113-125]
Tabei, Asghar
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Tabei, Asghar
Investigating the effect of functionalized carbon nanotubes on physical and mechanical properties of wood-plastic nanocomposite [Volume 38, Issue 1, 2023, Pages 59-74]
Tabibi, Mohammad reza
Study of Relationship of Aligning Marketing Strategies and Organizational Performance With the mediator role of Supply Chain Performance.Case study: Office Furniture Production Industrial Corporations in Tehran. [Volume 31, Fall 3, 2016, Pages 522-540]
Tabrsa, Taghi
Making wheat straw particleboards by using mixture of MF and UF resins [Volume 25, Issue 2, 2018, Pages 291-301]
Taghadosi, Amir hossein
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Taghipour Javy, Masoud
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018, Pages 166-178]
Taghiyari, Hamid reza
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013, Pages 252-265]
Taghiyari, Hamid Reza
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014, Pages 266-274]
Taghiyari, Hamid Reza
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2017, Pages 621-633]
Taghiyari, Hamid Reza
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011, Pages 477-485]
Taghiyari, Hamid Reza
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019, Pages 387-396]
Taghiyari, Hamid Reza
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020, Pages 271-282]
Taghizadeh, Fatemeh
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021, Pages 90-104]
Taheri, Amir Reza
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Taheri, Fatemeh
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Taheri, Zohreh
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019, Pages 112-123]
Tajadini, Azhang
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Tajadini, Azhang
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014, Pages 1-11]
Tajdini, Aghang
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Tajdini, Aghang
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017, Pages 83-93]
Tajdini, Ajang
The Investigation of the Utilization Impact of
Alnus subcordata Waste and Poplar Wood in Particle Board Production [Volume 30, SPRING 1, 2015, Pages 37-45]
Tajdini, Ajang
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015, Pages 475-490]
Tajdini, Ajang
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015, Pages 632-652]
Tajdini, Ajang
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015, Pages 578-594]
Tajdini, Ajang
The effect of new product layout on customer satisfaction in wooden household furniture industries using structural equations model in Tehran province [Volume 31, Summer 2, 2016, Pages 294-308]
Tajdini, Ajang
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Tajdini, Ajang
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Tajdini, Ajang
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018, Pages 359-369]
Tajdini, Ajang
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Tajdini, Ajang
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Tajdini, Ajang
Investigation and prediction on Fluting Paper Supply &Demand in Iran [Volume 23, Issue 2, 2008, Pages 123-135]
Tajdini, Ajang
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019, Pages 167-179]
Tajdini, Ajang
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021, Pages 194-204]
Tajdini, Ajang
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021, Pages 340-355]
Tajdini, Ajang
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Tajdini, Ajang
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Tajdini, Ajang
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023, Pages 1-20]
Tajdini, Ajang
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Tajdini, Ajang
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Tajdini, Ajang
Identifying and prioritizing the components of sustainable production in the corrugated box making industry [Volume 38, Issue 1, 2023, Pages 21-36]
Tajdini, Azhang
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Tajdini, Azhang
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Tajedini, Aghang
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012, Pages 529-583]
Tajedini, Aghang
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Tajedini, Ajang
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Tajedini, Ajang
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Tajidini, Ajang
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2015, Pages 550-560]
Tajvidi, Mehdi
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Tajvidi, Mehdi
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2014, Pages 597-607]
Tajvidi, Mehdi
Creep rupture behavior of a bagasse fiber-polypropylene composite [Volume 31, Issue 4, 2017, Pages 671-683]
Tajvidi, Mehdi
Investigation on the stress relaxation behavior of milled
newsprint filled polyethylene composite [Volume 27, Issue 2, 2012, Pages 226-234]
Tajvidi, Mehdi
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Tajvidi, Mehdi
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Tajvidi, Mehdi
Study on Mechanical Properties of Composites Made From Sander Dust of Particleboard-Polypropylene [Volume 24, Issue 1, 2009, Pages 58-68]
Tajvidi, Mehdi
Effect of compatibilizer, MAPP, on physical and mechanical properties of
reed stem flour- polypropylene composites [Volume 24, Issue 2, 2009, Pages 232-243]
Tajvidi, Mehdi
Effect of longitudinal compression to bulk cell wall on mechanical properties of steamed treated of beach wood [Volume 23, Issue 2, 2008, Pages 191-199]
Tajvidi, Mehdi
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2006, Pages 255-270]
Tajvidi, Mehdi
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2006, Pages 271-284]
Tajvidi, Mehdi
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006, Pages 33-42]
Tajvidi, Mehdi
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006, Pages 61-69]
Talaei, Aisona
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017, Pages 33-46]
Talaei, Aisona
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017, Pages 436-449]
Talaei, Aisona
Thermal analysis by TGA and DTA method of wood-polymer of furfurylated beech and fir wood [Volume 33, Issue 4, 2019, Pages 501-510]
Talaei, Aisona
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2020, Pages 547-562]
Talaei, Aisona
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020, Pages 178-194]
Talaei, Aisona
Investigation of the use of chitosan and carboxylic acids as a substitute for urea formaldehyde adhesive in medium density fiberboard [Volume 36, Issue 1, 2021, Pages 53-63]
Talaei, Aysoda
Effect of furfurylation on shear strength of bond line and screw withdrawal resistance of beech and fir [Volume 31, Fall 3, 2016, Pages 435-445]
Talaei, Aysona
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2014, Pages 720-731]
Talaei, Mohammad
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Talaeipoor, Mohammad
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Talaeipoor, Mohammad
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Talaeipoor, Mohammad
A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites [Volume 29, Fall 3, 2014, Pages 443-451]
Talaeipoor, Mohammad
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015, Pages 320-329]
Talaeipoor, Mohammad
Evaluation of thermal energy and activated carbon production from bagasse pith [Volume 31, Summer 2, 2016, Pages 181-193]
Talaeipoor, Mohammad
Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement- wood fibers composite. [Volume 30, WINTER 4, 2015, Pages 567-577]
Talaeipoor, Mohammad
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Talaeipoor, Mohammad
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Talaeipoor, Mohammad
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Talaeipoor, Mohammad
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011, Pages 387-397]
Talaeipoor, Mohammad
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2012, Pages 605-621]
Talaeipoor, Mohammad
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011, Pages 39-57]
Talaeipoor, Mohammad
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2018, Pages 201-210]
Talaeipoor, Mohammad
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009, Pages 325-340]
Talaeipoor, Mohammad
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007, Pages 29-40]
Talaeipoor, Mohammad
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020, Pages 195-204]
Talaei poor, Mohammad
Investigation on possibility of making durable paper with imported Eucalyptus pulp [Volume 24, Issue 1, 2009, Pages 44-57]
Talaei poor, Mohammad
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009, Pages 148-157]
Talaei poor, Mohammad
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020, Pages 127-137]
Talaei poor, Mohammad
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021, Pages 105-118]
Talaei poor, Mohammad
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021, Pages 256-263]
Talaei poor, Mohammad
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021, Pages 293-304]
Talaei poor, Mohammad
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Talaei poor, Mohammad
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Talaei poor, Mohammad
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023, Pages 141-154]
Talaeipour, Mohammad
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Talaeipour, Mohammad
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015, Pages 632-652]
Talaeipour, Mohammad
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021, Pages 182-193]
Talaeipour, Mohammad
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021, Pages 283-292]
Tamjidi, Abas
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Tamjidi, Abbas
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2017, Pages 648-661]
Tamjidi, Abbas
Investigation on the possibility of oriented strand board (OSB) production from hornbeam wood [Volume 34, Issue 1, 2019, Pages 140-156]
Tamjidi, Abbas
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Tamjidi, Abbas
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Taremian, Asghar
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013, Pages 123-133]
Taremian, Asghar
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Taremian, Asghar
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014, Pages 44-56]
Taremian, Asghar
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014, Pages 183-189]
Taremian, Asghar
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012, Pages 568-753]
Taremian, Asghar
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Taremian, Asghar
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Tarmian, Asghar
Improvement of adhesion strength of polyurethane and alkyd coatings by nano-silane using sol-gel method [Volume 32, Issue 3, 2017, Pages 322-333]
Tarmian, Asghar
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018, Pages 417-427]
Tarmian, Asghar
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023, Pages 281-295]
Tasoji, Mohamad
Making wheat straw particleboards by using mixture of MF and UF resins [Volume 25, Issue 2, 2018, Pages 291-301]
Tasoji, Mohammad
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Tasoji, Mohammad
Effect of static densification of treated paulownia wood on relationship between strength and density [Volume 26, Issue 3, 2011, Pages 592-604]
Tasooji, Mohammad
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011, Pages 128-137]
Tasooji, Mohammad
Physical and Mechanical Properties of Acrylated Epoxidized Soybean Oil- Wheat Straw Composite [Volume 37, Issue 4, 2022, Pages 330-345]
Tavakkoli, Amir
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Tavakkoli, Amir
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015, Pages 632-652]
Tavakkoli, Amir
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Tavakkoli, Majid
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2006, Pages 207-236]
Tavakoli, Hossein
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012, Pages 664-676]
Tavakoli, Mehrnoosh
The effect of using deinked mixed office waste pulp on the properties of Alkaline
Proxide Mechanical Pulp from cotton stalk [Volume 31, SPRING 1, 2016, Pages 48-57]
Tavakoli, Mehrnoosh
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023, Pages 330-340]
Tazakor Rezaie, Vahid
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite [Volume 31, Fall 3, 2016, Pages 425-434]
Tazkrrezaei, Vahid
Evaluation the effect of kiln schedule on warp and surface checking in beech
(fagus orientalis Lipsky) at 5 cm thickness [Volume 26, Issue 2, 2011, Pages 352-370]
Toghraei, Noshin
Effect of spacing on wood properties and yeild of Two Populus Deltoides clones in safrabasteh (Guilan) [Volume 8, 8- No. 217, 2000, Pages 1-30]
Toghraie, Nooshin
Position and role of tension wood in trees - Case study: Eucalypts [Volume 31, Summer 2, 2016, Pages 237-247]
Toghraie, Nooshin
Engineering properties of Hornbeam wood in Veisar region [Volume 9, 9-No. 225, 2000, Pages 109-149]
Toghraie, Nooshin
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
Toghraie, Nooshin
JUNIPERUS EXELSA L.: WOOD STRUCTURE AND PHYSICAL PROPERTIES IN IRANO-TORANI REGION [Volume 15, 15-No. 278, 2002, Pages 20-31]
Toghraie, Nooshin
EFFECTS OF ENVIRONMENTAL FACTORS ON FORMATION OF LIGNIN IN EUCALYPTUS CAMALDULENSIS DEHN. GROWN IN KHOSESTAN-IRAN [Volume 18, No. 1, 2003, Pages 1-38]
Toghraie, Nooshin
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003, Pages 89-108]
Topa, Afsaneh
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021, Pages 264-282]
Torabi vostikulaee, Iman
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017, Pages 565-575]
Torkaman, Javad
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Torkaman, Javad
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022, Pages 282-292]
Torkaman, Javad
Investigation of the effect of waste paper fibers on the fracture behavior of fiber-gypsum board [Volume 38, Issue 3, 2023, Pages 193-204]
Trighnoor, Elnaz
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016, Pages 472-485]
Tvasoli, Afshin
Replacing imported long fiber pulp with kenaf bast fiber soda pulp to improve quality of paper made from bagasse soda pulp [Volume 23, Issue 2, 2008, Pages 157-168]
U
Unesi kord khalili, Hamd
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2012, Pages 798-810]
Unsi kord khelili, Hamed
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011, Pages 454-465]
Usefi, Hossein
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2012, Pages 699-707]
Usefi, Hossein
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009, Pages 69-79]
Usefi, Hossein
Feasibility of utilizing polypropylene as a binder for plywood manufacture [Volume 24, Issue 1, 2009, Pages 91-98]
Usefi, Hossein
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008, Pages 63-73]
Usefi, Hossein
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008, Pages 149-156]
Usefi, Hossein
Effect of longitudinal compression to bulk cell wall on mechanical properties of steamed treated of beach wood [Volume 23, Issue 2, 2008, Pages 191-199]
V
Vaezi, Khashayar
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021, Pages 243-255]
Vaghari, Kiyoumars
The Effect of Using Cationic Starch and Bentonite on Physical and Mechanical Properties of Old Recycled Pulp [Volume 36, Issue 4, 2021, Pages 404-416]
Valayi, Hosein
Comparative Investigation on the properties of Soda and Soda-Ethanol pulps from three hardwoods [Volume 30, Fall 3, 2015, Pages 399-407]
Valizadeh, Eiman
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012, Pages 338-347]
Varamsh, Akbar
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017, Pages 369-381]
Varshoei, Ali
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011, Pages 291-299]
Vaysi, Ramin
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2014, Pages 755-762]
Vaysi, Ramin
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2017, Pages 569-580]
Vaysi, Ramin
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017, Pages 275-286]
Vaysi, Ramin
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017, Pages 311-321]
Vaysi, Ramin
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017, Pages 473-485]
Vaysi, Ramin
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018, Pages 1-11]
Vaysi, Ramin
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019, Pages 361-371]
Vaysi, Ramin
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020, Pages 61-75]
Vaysi, Ramin
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020, Pages 283-293]
Vaysi, Ramin
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021, Pages 368-381]
Vaysi, Ramin
The Effect of Using Cationic Starch and Bentonite on Physical and Mechanical Properties of Old Recycled Pulp [Volume 36, Issue 4, 2021, Pages 404-416]
Vaysi, Ramin
Identification and Comparison of Organic Chemical Components in Wood and Bark of Hornbeam and Ironwood Wood by GC-MS Methods [Volume 37, Issue 2, 2022, Pages 150-165]
Vaysi, Ramin
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022, Pages 229-238]
Vaysi, Ramin
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023, Pages 237-249]
Vaysi, Ramin
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024, Pages 55-71]
Vaziri, Vahid
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Vaziry, Vahid
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021, Pages 1-13]
Vaziryan, Arad
Investigation on Size Distribution and Fiber Dimensions of Cornstalks [Volume 24, Issue 1, 2009, Pages 1-14]
Veisi, Afshin
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015, Pages 320-329]
Veisi, Ramin
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015, Pages 72-84]
Veisi, Ramin
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015, Pages 256-265]
Veisi, Ramin
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016, Pages 349-361]
Veysi, Ramin
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015, Pages 408-418]
Visi, Jamail
A Study of the Effects of height and Thickness of Tenon Made Out of Beech and Hornbeam on bending Strength of Mortise and tenon joint [Volume 25, Issue 1, 2010, Pages 128-137]
V.Kokta, Bohuslav
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004, Pages 49-68]
Y
Yadollahi, Rahim
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013, Pages 489-497]
Yaghmaeipour, Abdolsaber
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013, Pages 89-96]
Yahyavi, Mostafa
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017, Pages 359-368]
Yahyavidizaj, Mostafa
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013, Pages 277-289]
Yarahmadi, Rasoul
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018, Pages 280-289]
Yarmand, Hmid
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2006, Pages 207-236]
Yavari, Alireza
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021, Pages 171-181]
Yavarian, Hamidreza
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021, Pages 26-39]
Yazdi meymand, Aliakbar
Evaluation of sandwich panels from palm leaves waste and plywood [Volume 38, Issue 1, 2023, Pages 48-58]
Yazdi Mymand, َAli Akbar
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2020, Pages 563-571]
Yekekhani, Mohssen
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014, Pages 94-105]
Yoosefnia, Zahra
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Younesi, Habibollah
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2021, Pages 348-361]
Younesi, Habibollah
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023, Pages 100-113]
Yousefi, Fahimeh
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019, Pages 276-289]
Yousefi, Farzad
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018, Pages 1-11]
Yousefi, Hossein
Studying the Effect of Pulp Refining and Paper Pressing in Using Nano Fibrillated Cellulose to Improve the CMP Pulp Properties [Volume 31, Summer 2, 2016, Pages 224-236]
Yousefi, Hossein
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020, Pages 22-32]
Yousefi, Hossein
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022, Pages 17-27]
Yousefi-golordi, Yousef
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020, Pages 61-75]
Yousefzadeh, Maryam
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018, Pages 438-452]
Z
Zabihzadeh, Majid
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Zabihzadeh, Majid
The effect of TCF bleaching before and after refining on the CMP pulp properties [Volume 31, Fall 3, 2016, Pages 510-521]
Zabihzadeh, Majid
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012, Pages 409-422]
Zabihzadeh, Seaid Majid
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016, Pages 375-387]
Zabihzadeh, Seid Majid
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers [Volume 31, Issue 4, 2017, Pages 662-670]
Zabihzadeh, Seid Majid
Creep rupture behavior of a bagasse fiber-polypropylene composite [Volume 31, Issue 4, 2017, Pages 671-683]
Zabihzadeh, Seyd Majid
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024, Pages 1-11]
Zabihzadeh, Seyed Majid
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019, Pages 290-301]
Zabihzadeh, Seyed Majid
Effect of test temperature on creep behavior of heat treated of Velvet Maple [Volume 34, Issue 3, 2019, Pages 424-434]
Zabihzadeh, Seyed Majid
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020, Pages 205-217]
Zabihzadeh, Seyed Majid
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2021, Pages 332-347]
Zabihzadeh, Seyed Majid
A feasibility study on identification of stickies and their sources in packaging paper mill [Volume 38, Issue 2, 2023, Pages 114-127]
Zabihzadeh, Seyed Majid
ontrol of micro-stickies originated from recycling of Old Corrugated Containers (OCC) using some selected chemical and physical methods [Volume 38, Issue 2, 2023, Pages 155-169]
Zabizadeh, Seyed majid
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018, Pages 428-437]
Zafari sarmori, Mohammad
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017, Pages 402-410]
Zahedi, Meysam
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012, Pages 655-663]
Zahedi, Misam
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2014, Pages 742-754]
Zahedi tabarstani, Ahmad reza
Investigating the properties of medium density fiberboard from
licorice root residues [Volume 27, Issue 3, 2012, Pages 471-482]
Zamani, Amir
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014, Pages 275-286]
Zamani, Seyedeh Masoomeh
Influence of thermally modification of ash and spruce on the functionality of fungal destructive agent (Coniophora puteana) [Volume 38, Issue 3, 2023, Pages 170-180]
Zamani, Zahar
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018, Pages 50-62]
Zamaninasab, Soheila
The effect of the type of chair connection on the stress distribution and structural failure by to finite element method [Volume 32, Issue 1, 2017, Pages 106-117]
Zanganeh, Hoshangh
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012, Pages 267-274]
Zare, Abbas
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018, Pages 244-255]
Zare, Abbas
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2019, Pages 478-488]
Zare, Mohammad saleh
Effect of furfurylation on shear strength of bond line and screw withdrawal resistance of beech and fir [Volume 31, Fall 3, 2016, Pages 435-445]
Zarea bidkei, Saeideh
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014, Pages 474-483]
Zarrinmehr, Jamshid
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018, Pages 100-111]
Zeinaly, Farhad
Investigating the effect of using oxygen delignification process on bagasse soda pulp properties [Volume 31, Summer 2, 2016, Pages 261-279]
Zeinaly, Farhad
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018, Pages 369-380]
Zeinaly, Farhad
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021, Pages 231-242]
Zhand, Soodeh
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Zhand, Soodeh
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Ziaee Khosro Shahi, Saeid
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013, Pages 266-276]
Ziaei Tabari, Hassan
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016, Pages 92-104]
Ziaei Tabari, Hassan
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012, Pages 202-211]
Zinali, Satar
AN INVESTIGATION ON DAMAGE OF AEOLESTHES SARTA SOLSKY ON INDUSTRIAL TIMBER IN IRAN [Volume 17, 17-No. 300, 2018, Pages 73-95]
Zyadzadeh, Amir
Investigation on Size Distribution and Fiber Dimensions of Cornstalks [Volume 24, Issue 1, 2009, Pages 1-14]
Zyaei, Hassan
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Zyaei, Mohssen
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014, Pages 299-309]
Zynali, Farhad
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011, Pages 339-351]
